Ricoh FV-L200B1 manual Vertical Timing Binning Full Scanning, Setting 10H 1XX10XXX, 11H, FVL200B1

Page 10

2.2.2Vertical Timing

2.2.2.1Binning Full Scanning

FVAL

8H

1+2

3+4

Video out

16H Vertical blanking

LVAL

DVAL

(setting 10H: 1XX10XXX, 11H: X000X000)

1 H = 208.5963 μs, 7.6582 Hz at 3.8fps 1 H = 104.2968 μs, 15.3164 Hz at 7.6fps 1 H = 52.1484 μs, 30.6328 Hz at 15.3fps

626H

One vertical (1V)
618H		16H
1233+1234	1235+1236

610H		16H
610H		16H

Video output

2.2.2.2Binning Partial Full Scanning

FVAL

6H

1+2

3+4

Video out

6H Vertical blanking

LVAL

DVAL

(setting 10H: 1XX11XXX, 11H: X000X000)

1 H = 208.5963 μs, 7.6828 Hz at 3.8fps 1 H = 104.2968 μs, 15.3655 Hz at 7.6fps 1 H = 52.1484 μs, 30.7310 Hz at 15.3fps

624H One vertical (1V)

618H	6H
1233+1234	1235+1236
618H	6H

Video output

	FVL200B1	10/32
	User’s Guide Rev. 1.01	10/32
	User’s Guide Rev. 1.01

Image 10

Contents Uxga CCD FVL200B1 User’s Guide RevTable of Contents Connector Specifications Camera Link ConnectorPowerI/O Connector / OUTNormal Mode Setting 10H Horizontal TimingVertical Timing Normal Full Scanning Setting 10H 1XX00XXX, 11HPartial Full Scanning Settting 10H 1XX01XXX, 11H Partial Scanning Setting 10H 1XX01XXX, 11H Variable Partial Scanning Setting 10H 1XX01XXX, 11H SUBBinning Mode Setting 10H Vertical Timing Binning Full Scanning Setting 10H 1XX10XXX, 11HSetting 10H 1XX11XXX, 11H Binning Partial Full ScanningBinning 1/2 Partial Scanning Setting 10H 1XX11XXX, 11H Binning 1/4 Partial Scanning Setting 10H 1XX11XXX, 11H1TAP10bit Data Order on the Camera Link Output1 Taps Transferring Image（1X1Y ） Pixel Transferring ImageFrame Exposure Normal ModeElectric Shutter Pulse Width Trigger Mode Pulse Width Trigger Mode（VReset ）Pulse Width Trigger Mode NonReset Exposure TimingEdge Preset Trigger Mode Edge Preset Trigger Mode VResetEdge Preset Trigger Mode NonReset Reset Mode Communication Method Communication SettingsCommunication Format Name Descriptions 【Example Code】Reading the data from the command 00H Camera Control Command Camera Command List Eeprom24/32 Descriptions of the Camera Control Commands Underline settings are the factory default settings26/32 27/32 28/32 29/32 30/32 31/32 32/32