Ricoh FV-L200B1 manual Vertical Timing, Normal Full Scanning Setting 10H 1XX00XXX, 11H

Page 6

2.1.2Vertical Timing

2.1.2.1

Normal Full Scanning

(Setting 10H: 1XX00XXX, 11H: X000X000)

1 H = 208.5963 μs, 3.8291 Hz at 3.8fps

1 H = 104.2968 μs, 7.6582 Hz at 7.6fps

1 H = 52.1484 μs, 15.3164 Hz at 15.3fps

1252H

FVAL

One vertical (1V)

16H

1236H

16H

1

2

1235

1236

Video out

16H

1236H

16H

Vertical blanking

Video output

LVAL

DVAL

2.1.2.2

Partial Full Scanning

(Settting 10H: 1XX01XXX, 11H: X000X000)

1 H = 208.5963 μs, 3.8599 Hz at 3.8fps 1 H = 104.2968 μs, 7.7199 Hz at 7.6fps 1 H = 52.1484 μs, 15.4397 Hz at 15.3fps

1242H One vertical (1V)

FVAL

6H1236H6H

1

2

1235

1236

Video out

6H1236H6H

VerticalVideo output blanking

LVAL

DVAL

※By transferring the blanking period pixels at a high rate, the frame rate of the partial full scanning can be increased compared to that of the normal full scanning.

	FVL200B1	6/32
	User’s Guide Rev. 1.01	6/32
	User’s Guide Rev. 1.01

Image 6

Contents Uxga CCD FVL200B1 User’s Guide RevTable of Contents Connector Specifications Camera Link ConnectorPowerI/O Connector / OUTNormal Mode Setting 10H Horizontal TimingNormal Full Scanning Setting 10H 1XX00XXX, 11H Vertical TimingPartial Full Scanning Settting 10H 1XX01XXX, 11H Partial Scanning Setting 10H 1XX01XXX, 11H Variable Partial Scanning Setting 10H 1XX01XXX, 11H SUBBinning Mode Setting 10H Vertical Timing Binning Full Scanning Setting 10H 1XX10XXX, 11HSetting 10H 1XX11XXX, 11H Binning Partial Full ScanningBinning 1/2 Partial Scanning Setting 10H 1XX11XXX, 11H Binning 1/4 Partial Scanning Setting 10H 1XX11XXX, 11H1TAP10bit Data Order on the Camera Link Output1 Taps Transferring Image（1X1Y ） Pixel Transferring ImageNormal Mode Frame ExposureElectric Shutter Pulse Width Trigger Mode Pulse Width Trigger Mode（VReset ）Pulse Width Trigger Mode NonReset Exposure TimingEdge Preset Trigger Mode Edge Preset Trigger Mode VResetEdge Preset Trigger Mode NonReset Reset Mode Communication Settings Communication MethodCommunication Format Name Descriptions 【Example Code】Reading the data from the command 00H Camera Control Command Camera Command List Eeprom24/32 Descriptions of the Camera Control Commands Underline settings are the factory default settings26/32 27/32 28/32 29/32 30/32 31/32 32/32