Sanyo VCC-WB2000P Image Mode setting, SET button, Camera title display, Live image screen display

Page 32

LIVE VIEW Settings

ID1

(View only)

ID2

ID3

E

IMAGE MODE setting

Saving Images into a Computer

This lets you set whether live images are displayed in color or black and white. The default setting is color mode (COLOR). To change the mode to black and white, select “GRAY”.

If you select “GRAY”, the amount of data transmitted will be reduced, so that the transmission speed can be increased.

Note: If pre-alarm recording has been set, the compression ratio and resolution cannot be set.

3[SET] button

This button is used to accept the settings in the drop-down list boxes.

4Camera title display

Click on the [CAMERA] button in the main menu and type in the title for the camera in the “CAMERA TITLE” field. This setting will be used as the camera title in displays. (p. 33)

This same camera title is displayed as part of the “ALARM” and “ALARM DATA” indicator displays.

5Live image screen display

The images from the camera are displayed here according to “2 Live image transmission settings”. (p. 30)

The camera images that are being monitored can be saved as still images in the computer’s storage area in JPEG2000 format.

1 When the image to be saved is being displayed in the live image screen, right-click the camera image.

The image will be displayed as a still image and the image save pop-up menu will be displayed. Click on this pop-up menu to display the image save dialog box.

2 Type in the filename and click the [Save] button.

The image will be saved into the computer.

Note:

•When saving images into a computer, the images will be saved at the selected resolution.

•The extension used for the saved images will be “.jp2”.

English

– 31 –

Image 32

Contents VCC-WB2000P Network CameraContents Precautions Features AccessoriesOperating environment Monitor OUT connector Power indicatorName and Function of Each Part Lens mount capName and Function of Each Part For C mount type Attaching the LensAttach the CS mount-type lens Flange Back Adjustment Turn on the camera’s powerConnections Basic ConnectionsConnections Inserting the wireless LAN cardRemoving the wireless LAN card PPP Dial-up Connections Network Camera Settings Network Camera Settings Installation of Plug-in SoftwareClick the Finish button Click the Install buttonUninstalling the plug-in software Camera uses cookies Browser SettingsCookie Settings Computer and Camera Connections Language selection windowAccessing Without Setting a Password Changing Access PermissionsClick the Network button Turn the camera off and then back on againNetwork Connection Settings Closing the initial windowSanyo Network CAMERA, the Unit is Click the Network button in the main menuNetwork SET Settings ID1 ID2 ID3Network Speed Http Port NumberWireless LAN SET Settings Current ChannelWEP Encipherment Encryption KEYPPP SET Settings Type in the commands to use for controlling the modemAuthentication Circuit TypeBaud Rate Data SizeMenu Screen and Main Menu AUTO/FINE radio buttonsMenu Screen and Main Menu Viewing Camera Images Opening and Closing the Initial ScreenSelect the language and then click the SET button When you have finished, click the network disconnect buttonViewing Camera Images Live View Settings Clock Unset indicatorClick the Live View button in the main menu Lit green NetcamLive View Settings Resolution ExpansionImage Mode setting SET buttonCamera title display Live image screen displayBack button View Frame OperationsClick the View Frame button in the main menu Camera Settings Live ImageCamera Title IrisCamera Settings BrightElectronic Shutter White BalanceClick the SET button Setting the camera titleType in the new camera title e.g. CAM1 Alarm Setting External Alarm Sensor SettingsClick the Alarm button in the main menu Change the External Alarm setting to NC or noAlarm Setting Time Motion Detector SET SettingsPicture Quality Alarm Data Recording Capacity Expansion memory cardsInserting the memory card Removing the memory cardClick the Alarm Data indicator while it is red or green Recording Alarm DataPlaying Back Alarm Data Buffer Data View screen Deleting Alarm Images Playing Back Expansion Memory Card ImagesMessage the Unit is Loading Click the Delete buttonPre-alarm and Post-alarm Recording Clock SET Settings Daylight Saving ModeClock SET TimezoneRS-232C Settings RS-232C SET Language SelectionClick the RS-232C button in the main menu Click the Language button to change the languageStatus Checking Click the Status button in the main menuFirmware Version SUB-MICROCOMPUTER VersionTroubleshooting Is the link indicator flashing?If the camera cannot be connected If you forget the IP AddressSpecifications 28 mm SpecificationsDimensions Page Printed on recycled paper 1AC6P1P2583 L5AB2/XE 0702KP-CZ