Sanyo VCC-WB2000P Camera Settings, Bright, Electronic Shutter, White Balance, Gamma

Page 35

CAMERA Settings

ID2

ID3

5BRIGHT

This lets you set the image brightness to one of five settings.

Setting range: 1 to 5 (Default: 3)

Note: The larger the setting, the brighter are the images.

6ELECTRONIC SHUTTER

This setting is used when IRIS is set to “AI”.

Setting range: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000

7BLC (backlight compensation)

Available settings:

•OFF: Backlight compensation is not carried out.

•MULTI (multiple point photometry): Backlight compensation is calculated from the whole image to obtain correct images.

•CENTER (center focus photometry): Backlight compensation is calculated based on the center of the image to obtain correct images.

8WHITE BALANCE

Available settings:

•AUTO (automatic white balance): The white balance is adjusted automatically to obtain correct colors even if the light source changes.

•INDOOR: This setting is for when the camera is being used indoors under fluorescent lighting.

•OUTDOOR: This setting is for when the camera is being used outdoors under natural sunlight.

•MANUAL (manual white balance): This lets you make manual fine adjustments to the white balance. It can be used when the “AUTO” setting does not give correct color reproduction.

☞Setting manual white balance (MANUAL)

Click the and buttons repeatedly to adjust the settings for R (red) and B (blue).

Setting range: 0 to 255

Note: The red or blue component becomes stronger when the setting is higher.

9AGC Gain

If the images are too dark, change the maximum [AGC Gain] value to make the images lighter.

The default setting is “0”.

Available settings:

OFF: AGC is not used.

–6 dB, 0, +6 dB, +9dB

FGAMMA

Select a value that is suitable for the monitor being used.

Setting range: 1, 0.8, 0.6, 0.45, 0.3

G[PRESET] button

Click this button to return all settings to their factory defaults. The preset confirmation dialog box will be displayed. Click the [OK] button to return the values to their factory defaults.

– 34 –

English

Image 35

Contents Network Camera VCC-WB2000PContents Precautions Accessories FeaturesOperating environment Lens mount cap Monitor OUT connectorPower indicator Name and Function of Each PartName and Function of Each Part For C mount type Attaching the LensAttach the CS mount-type lens Turn on the camera’s power Flange Back AdjustmentBasic Connections ConnectionsConnections Inserting the wireless LAN cardRemoving the wireless LAN card PPP Dial-up Connections Network Camera Settings Installation of Plug-in Software Network Camera SettingsClick the Finish button Click the Install buttonUninstalling the plug-in software Camera uses cookies Browser SettingsCookie Settings Language selection window Computer and Camera ConnectionsTurn the camera off and then back on again Accessing Without Setting a PasswordChanging Access Permissions Click the Network buttonClick the Network button in the main menu Network Connection SettingsClosing the initial window Sanyo Network CAMERA, the Unit isID1 ID2 ID3 Network SET SettingsHttp Port Number Network SpeedCurrent Channel Wireless LAN SET SettingsEncryption KEY WEP EnciphermentType in the commands to use for controlling the modem PPP SET SettingsData Size AuthenticationCircuit Type Baud RateAUTO/FINE radio buttons Menu Screen and Main MenuMenu Screen and Main Menu Opening and Closing the Initial Screen Viewing Camera ImagesSelect the language and then click the SET button When you have finished, click the network disconnect buttonViewing Camera Images Lit green Netcam Live View SettingsClock Unset indicator Click the Live View button in the main menuResolution Expansion Live View SettingsLive image screen display Image Mode settingSET button Camera title displayBack button View Frame OperationsClick the View Frame button in the main menu Iris Camera SettingsLive Image Camera TitleWhite Balance Camera SettingsBright Electronic ShutterClick the SET button Setting the camera titleType in the new camera title e.g. CAM1 Change the External Alarm setting to NC or no Alarm SettingExternal Alarm Sensor Settings Click the Alarm button in the main menuAlarm Setting Time Motion Detector SET SettingsPicture Quality Removing the memory card Alarm Data Recording CapacityExpansion memory cards Inserting the memory cardClick the Alarm Data indicator while it is red or green Recording Alarm DataPlaying Back Alarm Data Buffer Data View screen Click the Delete button Deleting Alarm ImagesPlaying Back Expansion Memory Card Images Message the Unit is LoadingPre-alarm and Post-alarm Recording Timezone Clock SET SettingsDaylight Saving Mode Clock SETClick the Language button to change the language RS-232C Settings RS-232C SETLanguage Selection Click the RS-232C button in the main menuSUB-MICROCOMPUTER Version Status CheckingClick the Status button in the main menu Firmware VersionIf you forget the IP Address TroubleshootingIs the link indicator flashing? If the camera cannot be connectedSpecifications 28 mm SpecificationsDimensions Page Printed on recycled paper 1AC6P1P2583 L5AB2/XE 0702KP-CZ