Alarm Setting
ID3 |
8PRIORITY setting
This sets the image quality for alarm recording.
•PICTURE QUALITY
Alarm images are recorded at high quality.
•TIME
Alarm images are recorded at normal quality.
*The time used for recording alarm images becomes interval shorter.
MOTION DETECTOR SET Settings
2
6
4 7
9ALARM RESOLUTION setting
This sets the resolution that is to be used for recording alarm images.
The default setting is “720x240”.
FOVERWRITE setting
If this is set to “ON” while a memory card is inserted, old alarm data is erased and new data is recorded over the top.
5
3
1 Click the [ALARM] button in the main menu.
The ALARM SET screen will be displayed.
2 Set MOTION DETECTOR to “ON”.
The MOTION DETECTOR SET screen will be displayed.
3
4
While looking at the screen, move the pointer to the motion sensor detection area and click with the left mouse button.
A sensor mark (ú) will appear in the detection area (grid).
Set other sensor marks in the detection area in the same way.
Note: If you click on a sensor mark that has been set, it will be cleared.
Click the [SET] button.
– 38 – | English |