Sanyo VCC-WB2000P instruction manual Clock SET Settings, Timezone, Daylight Saving Mode

CLOCK SET Settings

ID3

This lets you set the camera’s internal clock. You can also make settings for summer time.

Click the [CLOCK] button in the main menu.

The CLOCK SET screen will be displayed. Select the values from the drop-down list boxes, and then click the [SET] button. The settings will then be saved.

Note: If you click the [LIVE VIEW] button, the display will return to the live image screen.

1

2

3

4

1CLOCK SET

The default time setting is 00:00 on Jan 01 2002. Set the DATE and TIME. The weekday will be set automatically.

Note: If the time has not been set, the clock will start counting automatically from the default time setting when the power for the camera is turned on.

2TIMEZONE

This lets you set your standard time zone. Select the time zone for the camera’s location.

3DAYLIGHT SAVING MODE

This sets whether daylight saving (summer time) is to be used or not.

Available settings:

•USE: Daylight saving time is used. When set to “USE”, you can then set the times for daylight saving to be applied.

•NO USE: Daylight saving is not used.

4DAYLIGHT SAVING

When the set date and time is reached, the camera’s time automatically changes from standard time to summer time. You need to set the start time (ON) and end time (OFF) for summer time.

WEEK ... Sets the week and weekday.

Available settings:

•Week: 1ST, 2ND, 3RD, 4TH, LST

•Day: SUN, MON, TUE, WED, THU, FRI, SAT

MONTH ... Sets the start month and end month for summer time.

TIME ... Sets the hours and minutes.

– 44 – English