Sanyo VCC-WB2000P Alarm Setting, External Alarm Sensor Settings, Make the following connections

Page 37

Alarm Setting

ID3

The camera is equipped with two types of alarm function: an external alarm sensor and a motion sensor. When an outside intruder is detected, these alarm functions can be used to record the images immediately before the alarm occurred (pre-alarm recording) and the alarm images themselves (post-alarm recording) into the camera’s internal memory or onto a memory card.

When an alarm is received, the ALARM indicator illuminates red on the live image screen, so that you can check if an alarm is being received or not.

External Alarm Sensor Settings

1

2

3

4

5

6

7

8

9 F

1 Make the following connections.

When using this unit, the supplied clamping core A must be installed on the power cord, in order to prevent electromagnetic interference to the other devices connected.

•Connect an infrared sensor or similar to the ALARM IN terminal at the rear of the camera.

•Connect a buzzer or lamp to the ALARM OUT terminal.

				PC CARD
	MONITOR	ETHERNET		RS-232C
	OUT	ETHERNET		RS-232C
	OUT
		COM	AC24V	GND
	PC
	POWER 1 2			A
	MODEM		DC12V	A
	ALARM IN OUT			CLASS 2 WIRING

2 Click the [ALARM] button in the main menu.

The ALARM SET screen will be displayed.

3 Change the EXTERNAL ALARM setting to “NC” or “NO”.

You can then select the items that are required for setting external alarms.

Note: Set MOTION DETECTOR to “OFF”.

Buzzer or lamp

Infrared sensor or similar

– 36 –

English

Image 37

Contents Network Camera VCC-WB2000PContents Precautions Accessories FeaturesOperating environment Power indicator Monitor OUT connectorName and Function of Each Part Lens mount capName and Function of Each Part Attach the CS mount-type lens Attaching the LensFor C mount type Turn on the camera’s power Flange Back AdjustmentBasic Connections ConnectionsRemoving the wireless LAN card Inserting the wireless LAN cardConnections PPP Dial-up Connections Network Camera Settings Installation of Plug-in Software Network Camera SettingsUninstalling the plug-in software Click the Install buttonClick the Finish button Cookie Settings Browser SettingsCamera uses cookies Language selection window Computer and Camera ConnectionsChanging Access Permissions Accessing Without Setting a PasswordClick the Network button Turn the camera off and then back on againClosing the initial window Network Connection SettingsSanyo Network CAMERA, the Unit is Click the Network button in the main menuID1 ID2 ID3 Network SET SettingsHttp Port Number Network SpeedCurrent Channel Wireless LAN SET SettingsEncryption KEY WEP EnciphermentType in the commands to use for controlling the modem PPP SET SettingsCircuit Type AuthenticationBaud Rate Data SizeAUTO/FINE radio buttons Menu Screen and Main MenuMenu Screen and Main Menu Opening and Closing the Initial Screen Viewing Camera ImagesViewing Camera Images When you have finished, click the network disconnect buttonSelect the language and then click the SET button Clock Unset indicator Live View SettingsClick the Live View button in the main menu Lit green NetcamResolution Expansion Live View SettingsSET button Image Mode settingCamera title display Live image screen displayClick the View Frame button in the main menu View Frame OperationsBack button Live Image Camera SettingsCamera Title IrisBright Camera SettingsElectronic Shutter White BalanceType in the new camera title e.g. CAM1 Setting the camera titleClick the SET button External Alarm Sensor Settings Alarm SettingClick the Alarm button in the main menu Change the External Alarm setting to NC or noAlarm Setting Picture Quality Motion Detector SET SettingsTime Expansion memory cards Alarm Data Recording CapacityInserting the memory card Removing the memory cardPlaying Back Alarm Data Recording Alarm DataClick the Alarm Data indicator while it is red or green Buffer Data View screen Playing Back Expansion Memory Card Images Deleting Alarm ImagesMessage the Unit is Loading Click the Delete buttonPre-alarm and Post-alarm Recording Daylight Saving Mode Clock SET SettingsClock SET TimezoneLanguage Selection RS-232C Settings RS-232C SETClick the RS-232C button in the main menu Click the Language button to change the languageClick the Status button in the main menu Status CheckingFirmware Version SUB-MICROCOMPUTER VersionIs the link indicator flashing? TroubleshootingIf the camera cannot be connected If you forget the IP AddressSpecifications Dimensions Specifications28 mm Page Printed on recycled paper 1AC6P1P2583 L5AB2/XE 0702KP-CZ