TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR manual

Page 11

TRENDnet User’s Guide

4.After installing the IPSetup utility, the application is automatically installed to your computer, and creates a folder in Start\Program\TRENDnet\IPSetup.

5.Click Start>Programs>TRENDnet>IPSetup, and then click IPSetup.

6.The IPSetup window will appear. It will search for the camera within the same network.

Camera Display Area

TV-IP262PI

-Access Camera: Open Web browser to view camera .

-Camera Display Area: By default, the IP setting on the Camera is set to DHCP. If you have DHCP server, the camera will automatic get the IP address from DHCP server. If you do not have DHCP server on your network, it will show the default IP as 192.168.10.30. Double click the IP address; it will link to Camera’s Web Configuration page.

Change IP: Click this button to bring up the following window. It allows you to change the IP Address. You can select either Static IP or click DHCP. Then, enter the Administrator ID & Password. By default the ID/Password is: admin. When complete, click Change.

Search: Click this button to search the connected camera in the same network

Exit: Click this button to exit the program.

© Copyright 2012 TRENDnet. All Rights Reserved.

10

Image 11

Contents Page Contents Features Package ContentsFront Panel View Product Hardware FeaturesRear Panel View Inside Component Application Diagram∙ LED indicators Hardware Installation InstallationLick the Install Camera Camera InstallationTV-IP262PI TV-IP262PI Starting Camera Finder Click StartProgramsTRENDnetIPSetup, and then click IPSetup Viewing Camera Basic Function ConfigurationSelect ToolsInternet Options Select Security Configuring the Camera SettingLive View/Setup Switch Smart Wizard ∙ Camera Setting∙ IP Setting ∙ Email SettingsBasic System ∙ Confirm SettingsBasic ∙ Guest Basic Date & TimeBasic User ∙ General UserNetwork ∙ Direct Video Stream Authentication∙ Ports Number Network Network∙ QoS Network AdvancedDeny Video & AudioNetwork IP Filter AcceptVideo & Audio Video ∙ Image SettingNight mode Change night mode to color or Mono Video & Audio CameraVideo & Audio Overlay / Mask 264Video & Audio Audio Video & Audio Overlay / Mask Text Overlay Event ServerHttp Notify For Motion Trigger Event Server Setting FTPEvent Server Setting Network Storage ∙ Network Storage Event Server Setting Email∙ Instant Message Event Server Setting Instant MessageMotion Detect Event Configuration General Setting ∙ General Event ConfigEvent Configuration Schedule Trigger Event Configuration Motion Detect TriggerSD Card ToolsSD Card File Manager SD Card SD Card SettingInformation System Log Device InfoInformation Device Info Configure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Enable Click EnableConfigure Ddns on your router Name Enter the application name eg. Camera Name Dimension Reset ButtonPower Consumption PowerInterface To Run SecurView Backup / RestoreSettings Image Requirement ManagementSupports up to 2 destination accounts Power LED and Ethernet Activity LED do not light upCamera can’t be accessed or access is slow Camera can be accessed locally but not remotelyCamera images are of poor quality White vertical lines appear on the image from the cameraCamera images are blurry Camera images are ‘noisy’TV-IP262PI 3 Years Limited Warranty Limited WarrantyLimited Warranty