TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR manual TV-IP262PI

Page 8

TRENDnet User’s Guide

5.Connect a network cable to the camera’s network port and then to your router.

If you are using PoE, please ensure the cable is connected to a PoE switch or PoE injector.

6.Wait while camera is searching.

TV-IP262PI

7.The founded cameras will show on the screen. The camera already selected by default if you have only one camera installed. If you have more than one camera in the same Network, you will need to identify the camera by the MAC ID.

8.You MUST change the default password of the camera. Enter the default password: admin, Enter your new password: must be between 8 and 32 characters. (Alphanumeric: a-z, A-Z,0-9)

© Copyright 2012 TRENDnet. All Rights Reserved.

7

Image 8

Contents Page Contents Package Contents FeaturesFront Panel View Product Hardware FeaturesRear Panel View Inside Component Application Diagram∙ LED indicators Installation Hardware InstallationCamera Installation Lick the Install CameraTV-IP262PI TV-IP262PI Starting Camera Finder Click StartProgramsTRENDnetIPSetup, and then click IPSetup Configuration Viewing Camera Basic FunctionSelect ToolsInternet Options Select Security Configuring the Camera SettingLive View/Setup Switch ∙ Camera Setting ∙ IP Setting∙ Email Settings Smart WizardBasic System ∙ Confirm SettingsBasic Basic Date & Time Basic User∙ General User ∙ Guest∙ Direct Video Stream Authentication NetworkNetwork Network ∙ Ports NumberNetwork Advanced ∙ QoSVideo & Audio Network IP FilterAccept Deny∙ Image Setting Night mode Change night mode to color or MonoVideo & Audio Camera Video & Audio VideoVideo & Audio Overlay / Mask 264Video & Audio Audio Event Server Video & Audio Overlay / Mask Text OverlayEvent Server Setting FTP Http Notify For Motion TriggerEvent Server Setting Email Event Server Setting Network Storage ∙ Network Storage∙ Instant Message Event Server Setting Instant MessageMotion Detect Event Config Event Configuration General Setting ∙ GeneralEvent Configuration Motion Detect Trigger Event Configuration Schedule TriggerTools SD CardSD Card SD Card Setting SD Card File ManagerInformation System Log Device InfoInformation Device Info How to setup/access the camera behind a Router Configure Ddns on your CameraProtocol Select TCP Enable Click EnableConfigure Ddns on your router Name Enter the application name eg. Camera Name Reset Button Power ConsumptionPower DimensionBackup / Restore Settings ImageRequirement Management Interface To Run SecurViewPower LED and Ethernet Activity LED do not light up Camera can’t be accessed or access is slowCamera can be accessed locally but not remotely Supports up to 2 destination accountsWhite vertical lines appear on the image from the camera Camera images are blurryCamera images are ‘noisy’ Camera images are of poor qualityLimited Warranty TV-IP262PI 3 Years Limited WarrantyLimited Warranty