TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR Camera General, Audio, Pan/Tilt

Page 35

TRENDnet User’s Guide

Technical Specifications

Camera

General	Sensor: 1/4” Megapixel CMOS sensor
	Max. Resolution: 1280 x 1024 pixels
	Board Lens
	Focal Length: 3.58 mm
	Aperture (F/No): F2.0 +/- 5%
	Minimum illumination: 0 Lux (night vision)
	Viewing Angle
	-	Horizontal: 70°
	-	Vertical: 51°
	- Diagonal: 89°

Audio	Microphone out port (microphone sold separately)
	Audio out port: Mono (speakers sold separately)
	Sensitivity: -42dB +/- 3dB
	Frequency: 100~10,000Hz
	S/N: 65dB
	Format: PCM/AMR

Pan/Tilt	Manually adjust camera to final fixed position:
(Manually)	Pan: -175° ~ +175°

	Tilt: 20 ~ 90°

TV-IP262PI

SD Slot	Supports SD / SDHC (up to 32 GB); SD card not
	included

Hardware

Network	IEEE 802.3u 10/100Mbps Fast Ethernet
	IEEE 802.3af PoE

LED	Power, Link / Act (can turn off LEDs)

Reset Button	Reboot or restore to factory default

Power Consumption	7 watts max.

Power	Input: 100 ~ 240V AC , 0.5A, 50~60Hz
	Output: 12VDC 1.5A external power adapter (for non-
	PoE installations)

Dimension	131 x 131 x 127 mm (5.2 x 5.2 x 5 in.)

Weight	570 g (20.1 oz.)

Temperature	Operating: 0°C ~ 50°C (32°F ~ 122°F)
	Storage: -15°C ~ 60°C (5°F ~ 140°F)

Humidity	Max. 90% (non-condensing)

Certifications	CE, FCC

© Copyright 2012 TRENDnet. All Rights Reserved.

34

Image 35

Contents Page Contents Features Package ContentsFront Panel View Product Hardware FeaturesRear Panel View Inside Component Application Diagram∙ LED indicators Hardware Installation InstallationLick the Install Camera Camera InstallationTV-IP262PI TV-IP262PI Starting Camera Finder Click StartProgramsTRENDnetIPSetup, and then click IPSetup Viewing Camera Basic Function ConfigurationSelect ToolsInternet Options Select Security Configuring the Camera SettingLive View/Setup Switch Smart Wizard ∙ Camera Setting∙ IP Setting ∙ Email SettingsBasic System ∙ Confirm SettingsBasic ∙ Guest Basic Date & TimeBasic User ∙ General UserNetwork ∙ Direct Video Stream Authentication∙ Ports Number Network Network∙ QoS Network AdvancedDeny Video & AudioNetwork IP Filter AcceptVideo & Audio Video ∙ Image SettingNight mode Change night mode to color or Mono Video & Audio CameraVideo & Audio Overlay / Mask 264Video & Audio Audio Video & Audio Overlay / Mask Text Overlay Event ServerHttp Notify For Motion Trigger Event Server Setting FTPEvent Server Setting Network Storage ∙ Network Storage Event Server Setting Email∙ Instant Message Event Server Setting Instant MessageMotion Detect Event Configuration General Setting ∙ General Event ConfigEvent Configuration Schedule Trigger Event Configuration Motion Detect TriggerSD Card ToolsSD Card File Manager SD Card SD Card SettingInformation System Log Device InfoInformation Device Info Configure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Enable Click EnableConfigure Ddns on your router Name Enter the application name eg. Camera Name Dimension Reset ButtonPower Consumption PowerInterface To Run SecurView Backup / RestoreSettings Image Requirement ManagementSupports up to 2 destination accounts Power LED and Ethernet Activity LED do not light upCamera can’t be accessed or access is slow Camera can be accessed locally but not remotelyCamera images are of poor quality White vertical lines appear on the image from the cameraCamera images are blurry Camera images are ‘noisy’TV-IP262PI 3 Years Limited Warranty Limited WarrantyLimited Warranty