TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR Requirement Management, Pro, QoS

Page 36

TRENDnet User’s Guide

Requirement

Management	Internet Explorer 7.0 or above
Interface

To Run SecurView	Windows 7 (32/64-bit), Vista (32/64-bit), XP (32/64-bit)
Pro	Windows Server 2003, 2008

SecurView Pro	Channel: supports up to 32 cameras
	Record / Playback / Motion Detection / Audio

Network Protocols	TCP/IP, IPv4, DHCPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS,
	SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour,
	RTP, RTSP, SSL, RTCP, 3GPP, Compliant with 8.1 to 8.4 ONVIF
	1.01.1.26 platforms

Management

Remote	Remote management supported

Backup / Restore	Save / retrieve configuration files

	TV-IP262PI
Settings
Image	Automatic exposure, white balance, and gain control
	Brightness, saturation, sharpness, light frequency, and mirror
	(horizontal/vertical)
Video	Encoding type: H.264, MPEG-4, MJPEG
	Compression: 5 levels
	Resolution / Frame Rate:
	∙ SXGA (1280 x 1024) up to 15 fps
	∙ 720p (1280 x 720) up to 15 fps
	∙ VGA (640x480) up to 30 fps
	∙ QVGA (320x240) up to 30 fps
	∙ QQVGA (160x120) up to 30 fps
	Multi-Stream
	∙ H.264: SXGA, VGA, QVGA, QQVGA, 720P
	∙ MPEG-4: VGA, QVGA, QQVGA
	∙ MJPEG: SXGA, VGA, QVGA, QQVGA, 720P
Recording /	Recording type: continuous, schedule, motion detection, or
snapshot	snapshot
Event	Event trigger: motion, schedule
Management	Store video file to SD card or storage device
	Send Instant message to Jabber client via Jabber server
Overlay	Text overlay: time, date, and text
	Mask overlay: define up to 2 opaque boxes to conceal portions of
	the recording area
QoS	DSCP

© Copyright 2012 TRENDnet. All Rights Reserved.

35

Image 36

Contents Page Contents Package Contents FeaturesProduct Hardware Features Rear Panel ViewFront Panel View Application Diagram ∙ LED indicatorsInside Component Installation Hardware InstallationCamera Installation Lick the Install CameraTV-IP262PI TV-IP262PI Starting Camera Finder Click StartProgramsTRENDnetIPSetup, and then click IPSetup Configuration Viewing Camera Basic FunctionConfiguring the Camera Setting Live View/Setup SwitchSelect ToolsInternet Options Select Security ∙ Camera Setting ∙ IP Setting∙ Email Settings Smart Wizard∙ Confirm Settings BasicBasic System Basic Date & Time Basic User∙ General User ∙ Guest∙ Direct Video Stream Authentication NetworkNetwork Network ∙ Ports NumberNetwork Advanced ∙ QoSVideo & Audio Network IP FilterAccept Deny∙ Image Setting Night mode Change night mode to color or MonoVideo & Audio Camera Video & Audio Video264 Video & Audio AudioVideo & Audio Overlay / Mask Event Server Video & Audio Overlay / Mask Text OverlayEvent Server Setting FTP Http Notify For Motion TriggerEvent Server Setting Email Event Server Setting Network Storage ∙ Network StorageEvent Server Setting Instant Message Motion Detect∙ Instant Message Event Config Event Configuration General Setting ∙ GeneralEvent Configuration Motion Detect Trigger Event Configuration Schedule TriggerTools SD CardSD Card SD Card Setting SD Card File ManagerDevice Info Information Device InfoInformation System Log How to setup/access the camera behind a Router Configure Ddns on your CameraEnable Click Enable Configure Ddns on your routerProtocol Select TCP Name Enter the application name eg. Camera Name Reset Button Power ConsumptionPower DimensionBackup / Restore Settings ImageRequirement Management Interface To Run SecurViewPower LED and Ethernet Activity LED do not light up Camera can’t be accessed or access is slowCamera can be accessed locally but not remotely Supports up to 2 destination accountsWhite vertical lines appear on the image from the camera Camera images are blurryCamera images are ‘noisy’ Camera images are of poor qualityLimited Warranty TV-IP262PI 3 Years Limited WarrantyLimited Warranty