TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR manual Configuration

Page 12

TRENDnet User’s Guide

Configuration

Viewing Camera Basic Function

Open the Web browser on your computer (example showed in the User’s Guide is based on the Internet Explorer). Type the default IP address (192.168.10.30) or the IP address found by IPSetup in the Address bar, and then press [Enter].

When the login window appears, enter the default User name (admin) and Password (admin) and press OK to access to the main screen of the camera’s Web Configuration.

NOTE: If you are initially access to the camera, you will be ask to install a new plug-in for the camera. Permission request depends on the Internet security settings of your computer. Click Yes to proceed.

TV-IP262PI

After you login into the Web Configuration of the camera, the main page will appear as below:

The Main screen of the Web Configuration provides you with many useful information and functions, including:

© Copyright 2012 TRENDnet. All Rights Reserved.

11

Image 12

Contents Page Contents Package Contents FeaturesProduct Hardware Features Rear Panel ViewFront Panel View Application Diagram ∙ LED indicatorsInside Component Installation Hardware InstallationCamera Installation Lick the Install CameraTV-IP262PI TV-IP262PI Starting Camera Finder Click StartProgramsTRENDnetIPSetup, and then click IPSetup Configuration Viewing Camera Basic FunctionConfiguring the Camera Setting Live View/Setup SwitchSelect ToolsInternet Options Select Security ∙ Camera Setting ∙ IP Setting∙ Email Settings Smart Wizard∙ Confirm Settings BasicBasic System Basic Date & Time Basic User∙ General User ∙ Guest∙ Direct Video Stream Authentication NetworkNetwork Network ∙ Ports NumberNetwork Advanced ∙ QoSVideo & Audio Network IP FilterAccept Deny∙ Image Setting Night mode Change night mode to color or MonoVideo & Audio Camera Video & Audio Video264 Video & Audio AudioVideo & Audio Overlay / Mask Event Server Video & Audio Overlay / Mask Text OverlayEvent Server Setting FTP Http Notify For Motion TriggerEvent Server Setting Email Event Server Setting Network Storage ∙ Network StorageEvent Server Setting Instant Message Motion Detect∙ Instant Message Event Config Event Configuration General Setting ∙ GeneralEvent Configuration Motion Detect Trigger Event Configuration Schedule TriggerTools SD CardSD Card SD Card Setting SD Card File ManagerDevice Info Information Device InfoInformation System Log How to setup/access the camera behind a Router Configure Ddns on your CameraEnable Click Enable Configure Ddns on your routerProtocol Select TCP Name Enter the application name eg. Camera Name Reset Button Power ConsumptionPower DimensionBackup / Restore Settings ImageRequirement Management Interface To Run SecurViewPower LED and Ethernet Activity LED do not light up Camera can’t be accessed or access is slowCamera can be accessed locally but not remotely Supports up to 2 destination accountsWhite vertical lines appear on the image from the camera Camera images are blurryCamera images are ‘noisy’ Camera images are of poor qualityLimited Warranty TV-IP262PI 3 Years Limited WarrantyLimited Warranty