TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR manual Network Advanced, ∙ QoS

Page 19

TRENDnet User’s Guide

Network >> Advanced

HTTPS

Enable: Select this option to enable HTTPS, which is a secure protocol to provide authenticated and encrypted communication within your network.

HTTPS Port: Assign a HTTPS port in the text box. The default HTTPS port is 443.

Bonjour: The devices with Bonjour will automatically broadcast their own services and listen for services being offered for the use of others. If your browser with Bonjour, you can find the camera on your local network without knowing its IP address.

The Apple Safari is already with Bonjour. You can download the complete Bonjour for Internet Explorer browser from Apple's web site by visiting http://www.apple.com/bonjour/.

TV-IP262PI

RTSP

RTSP Streaming: The camera supports three levels of RTSP access. The default RTSP Port is 554.

Disable

RTSP link does not require authentication. No

 

username/password required.

sic

RTSP link prompts for authentication.

 

Username/password are transmitted in plain text.

Digest

RTSP link prompts for authentication.

 

Username/password are encrypted during data

 

transmission.

TRENDnet recommends using RSTP Digest authentication method. Disable and Basic methods pose security risks. Please verify if your RTSP client supports RSTP authentication method selected.

Multicast settings: Configure the following settings so that you can deliver information from your camera to a set of receivers.

Group IP

Assign a category of IP addresses to receive the information

 

from the camera.

H.264 Port

Assign a multicast port for H.264 in the text box.

 

The default port is 1234.

MPEG4 Port

Assign a multicast port for MPEG4 in the text box.

 

The default port is 1236.

Audio Port

Assign a multicast port for audio in the text box.

 

The default port is 1238.

TTL

Set the TTL value from 1 to 255, which is used to modify

 

the time to live field in the IP header.

QoS

Live Video DSCP: Assign the DSCP (DiffServ Code Point) of the stream video

from the camera.

Live Audio DSCP: Assign the DSCP (DiffServ Code Point) of the stream audio from the camera.

© Copyright 2012 TRENDnet. All Rights Reserved.

18

Image 19
Contents Page Contents Features Package ContentsRear Panel View Product Hardware FeaturesFront Panel View ∙ LED indicators Application DiagramInside Component Hardware Installation InstallationLick the Install Camera Camera InstallationTV-IP262PI TV-IP262PI Starting Camera Finder Click StartProgramsTRENDnetIPSetup, and then click IPSetup Viewing Camera Basic Function ConfigurationLive View/Setup Switch Configuring the Camera SettingSelect ToolsInternet Options Select Security Smart Wizard ∙ Camera Setting∙ IP Setting ∙ Email SettingsBasic ∙ Confirm SettingsBasic System ∙ Guest Basic Date & TimeBasic User ∙ General UserNetwork ∙ Direct Video Stream Authentication∙ Ports Number Network Network∙ QoS Network AdvancedDeny Video & AudioNetwork IP Filter AcceptVideo & Audio Video ∙ Image SettingNight mode Change night mode to color or Mono Video & Audio CameraVideo & Audio Audio 264Video & Audio Overlay / Mask Video & Audio Overlay / Mask Text Overlay Event ServerHttp Notify For Motion Trigger Event Server Setting FTPEvent Server Setting Network Storage ∙ Network Storage Event Server Setting EmailMotion Detect Event Server Setting Instant Message∙ Instant Message Event Configuration General Setting ∙ General Event ConfigEvent Configuration Schedule Trigger Event Configuration Motion Detect TriggerSD Card ToolsSD Card File Manager SD Card SD Card SettingInformation Device Info Device InfoInformation System Log Configure Ddns on your Camera How to setup/access the camera behind a RouterConfigure Ddns on your router Enable Click EnableProtocol Select TCP Name Enter the application name eg. Camera Name Dimension Reset ButtonPower Consumption PowerInterface To Run SecurView Backup / RestoreSettings Image Requirement ManagementSupports up to 2 destination accounts Power LED and Ethernet Activity LED do not light upCamera can’t be accessed or access is slow Camera can be accessed locally but not remotelyCamera images are of poor quality White vertical lines appear on the image from the cameraCamera images are blurry Camera images are ‘noisy’TV-IP262PI 3 Years Limited Warranty Limited WarrantyLimited Warranty