TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR manual Network

Page 17

TRENDnet User’s Guide

NOTE: The “General User” is allowed to access the camera and control the Function buttons on the Main screen of the Web Configuration.; the “Guest” can only view the live view image from the Main screen while accessing the camera. Only the “Administrator” is allowed to configure the camera through the Web Configuration.

∙Direct Video Stream Authentication:

To steam the video directly without going through the configuration page, you can access it via Internet.

Enable: User needs to enter user name and password to stream the camera.

Disable: User can stream the camera without entering the user name and password.

Examples of the direct link to video:

H.264 Mode

http://camera_ip_address:port number/h264view.htm

MPEG4 Mode

http://camera_ip_address:port number/mpgview.htm

MJPEG Mode

http://camera_ip_address:port number/jpgview.htm

NOTE This feature is enabled by default, and for security reason, it is recommended to have the feature enabled at all time.

TV-IP262PI

Network

The Network menu contains two sub-menus that provide the networking settings for the camera, such as the IP Setting, DDNS Setting, and IP Filter.

© Copyright 2012 TRENDnet. All Rights Reserved.

16

Image 17

Contents Page Contents Features Package ContentsFront Panel View Product Hardware FeaturesRear Panel View Inside Component Application Diagram∙ LED indicators Hardware Installation InstallationLick the Install Camera Camera InstallationTV-IP262PI TV-IP262PI Starting Camera Finder Click StartProgramsTRENDnetIPSetup, and then click IPSetup Viewing Camera Basic Function ConfigurationSelect ToolsInternet Options Select Security Configuring the Camera SettingLive View/Setup Switch ∙ IP Setting ∙ Camera Setting ∙ Email Settings Smart WizardBasic System ∙ Confirm SettingsBasic Basic User Basic Date & Time∙ General User ∙ GuestNetwork ∙ Direct Video Stream Authentication∙ Ports Number Network Network∙ QoS Network AdvancedNetwork IP Filter Video & AudioAccept DenyNight mode Change night mode to color or Mono ∙ Image SettingVideo & Audio Camera Video & Audio VideoVideo & Audio Overlay / Mask 264Video & Audio Audio Video & Audio Overlay / Mask Text Overlay Event ServerHttp Notify For Motion Trigger Event Server Setting FTPEvent Server Setting Network Storage ∙ Network Storage Event Server Setting Email∙ Instant Message Event Server Setting Instant MessageMotion Detect Event Configuration General Setting ∙ General Event ConfigEvent Configuration Schedule Trigger Event Configuration Motion Detect TriggerSD Card ToolsSD Card File Manager SD Card SD Card SettingInformation System Log Device InfoInformation Device Info Configure Ddns on your Camera How to setup/access the camera behind a RouterProtocol Select TCP Enable Click EnableConfigure Ddns on your router Name Enter the application name eg. Camera Name Power Consumption Reset ButtonPower DimensionSettings Image Backup / RestoreRequirement Management Interface To Run SecurViewCamera can’t be accessed or access is slow Power LED and Ethernet Activity LED do not light upCamera can be accessed locally but not remotely Supports up to 2 destination accountsCamera images are blurry White vertical lines appear on the image from the cameraCamera images are ‘noisy’ Camera images are of poor qualityTV-IP262PI 3 Years Limited Warranty Limited WarrantyLimited Warranty