TRENDnet trendnet The Megapixel PoE Dome Internet Camera with IR manual Enable Click Enable

Page 33

TRENDnet User’s Guide

5.Go to Virtual Server* section and create a new entry.

Enable: Click Enable

Name: Enter the application name (eg. CameraName)

Protocol: Select TCP

Private Port: The HTTP port that you assign on your Camera.

Public Port: The port used on remote side to access to your Camera.

LAN Server: The local IP address of your Camera.

Then click Add to add the application.

*Please refer to your router’s user’s manual for detail Virtual Server setting. Some router might use Port Forwarding or Special applications for this function. The setup steps should be very similar.

TV-IP262PI

6.Open another web browser and enter your DDNS domain and camera’s port number.

http://yourDomainName:PortNumber

7. Camera’s login page will appear.

Configure DDNS on your router

1.Go to Camera’s DDNS  Ports Number section, assign a HTTP port for your camera and click Apply.

© Copyright 2012 TRENDnet. All Rights Reserved.

32

Image 33

Contents Page Contents Features Package ContentsProduct Hardware Features Rear Panel ViewFront Panel View Application Diagram ∙ LED indicatorsInside Component Hardware Installation InstallationLick the Install Camera Camera InstallationTV-IP262PI TV-IP262PI Starting Camera Finder Click StartProgramsTRENDnetIPSetup, and then click IPSetup Viewing Camera Basic Function ConfigurationConfiguring the Camera Setting Live View/Setup SwitchSelect ToolsInternet Options Select Security ∙ IP Setting ∙ Camera Setting∙ Email Settings Smart Wizard∙ Confirm Settings BasicBasic System Basic User Basic Date & Time∙ General User ∙ GuestNetwork ∙ Direct Video Stream Authentication∙ Ports Number Network Network∙ QoS Network AdvancedNetwork IP Filter Video & AudioAccept DenyNight mode Change night mode to color or Mono ∙ Image SettingVideo & Audio Camera Video & Audio Video264 Video & Audio AudioVideo & Audio Overlay / Mask Video & Audio Overlay / Mask Text Overlay Event ServerHttp Notify For Motion Trigger Event Server Setting FTPEvent Server Setting Network Storage ∙ Network Storage Event Server Setting EmailEvent Server Setting Instant Message Motion Detect∙ Instant Message Event Configuration General Setting ∙ General Event ConfigEvent Configuration Schedule Trigger Event Configuration Motion Detect TriggerSD Card Tools SD Card File Manager SD Card SD Card SettingDevice Info Information Device InfoInformation System Log Configure Ddns on your Camera How to setup/access the camera behind a RouterEnable Click Enable Configure Ddns on your routerProtocol Select TCP Name Enter the application name eg. Camera Name Power Consumption Reset ButtonPower DimensionSettings Image Backup / RestoreRequirement Management Interface To Run SecurViewCamera can’t be accessed or access is slow Power LED and Ethernet Activity LED do not light upCamera can be accessed locally but not remotely Supports up to 2 destination accountsCamera images are blurry White vertical lines appear on the image from the cameraCamera images are ‘noisy’ Camera images are of poor qualityTV-IP262PI 3 Years Limited Warranty Limited WarrantyLimited Warranty