Transcend Information TS16G-64GCF400, 400X dimensions True IDE Mode I/O Transfer Function

Page 48

TS16G~64GCF400

400X CompactFlash Card

 

 

 

True IDE Mode I/O Transfer Function

The CompactFlash Storage Card can be configured in a True IDE Mode of operation. The CompactFlash Storage Card is configured in this mode only when the -OE input signal is grounded by the host during the power off to power on cycle. Optionally, CompactFlash Storage Cards may support the following optional detection methods:

1.The card is permitted to monitor the –OE (-ATA SEL) signal at any time(s) and switch to PCMCIA mode upon detecting a high level on the pin.

2.The card is permitted to re-arbitrate the interface mode determination following a transition of the (-)RESET pin.

3.The card is permitted to monitor the –OE (-ATA SEL) signal at any time(s) and switch to True IDE mode upon detection of a continuous low level on pin for an extended period of time.

Table: True IDE Mode I/O Function defines the function of the operations for the True IDE Mode.

Transcend Information Inc.

48

V1.0

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Placement Features DimensionsDescription Specification Performance Actual CapacityModel P/N Model P/N User LBA Cylinder Head SectorBlock Diagram TS16G~64GCF400 PC Card Memory Mode PC Card I/O Mode Pin Assignments and Pin TypeTrue IDE Mode4 PC Card Memory Mode PC Card I/O Mode True IDE Mode4 Input Characteristics Input Leakage CurrentOutput Drive Type Output Drive Characteristics Output Drive CharacteristicsType Parameter Symbol Conditions Signal Description Signal Name Dir Pin Description400X CompactFlash Card StschgCsel GNDSignal Name DirPin Description Stop ReadyIntrq Reset REGDmack Wait IordyDdmardy DstrobeElectrical Specification CompactFlash Interface I/O atInput Power Input Characteristics for Udma mode Parameter SymbolOutput Drive Characteristics for Udma mode UnitsSignal Interface Signal Card10 Host10Low Pull-up pin 45 BVD2 to avoid sensing their batteries as LowLow state 150 a high state per socketUltra DMA Electrical Requirements Series termination required for Ultra DMA operationTable Typical Series Termination for Ultra DMA Ultra DMA Mode Cabling Requirement Attribute Memory Read Timing Specification SymbolIeee Symbol Min ns Max ns Speed VersionTable Configuration Register Attribute Memory Write Timing Speed Version 250 ns Symbol Min ns Max nsCommon Memory Read Timing Specification Cycle Time ModeIeee 250 ns 120 ns 100 ns 80 ns MinCommon Memory Write Timing Specification Cycle Time Mode 250 ns SymbolSymbol 120 ns Min 100 ns MinInput Read Timing Specification Cycle Time Mode 250 ns 120 ns 100 ns 80 nsMin Max Symbol Output Write Timing Specification Cycle Time Mode 255 ns 120 ns 100 ns 80 nsTsuHIOW TDVIWH ThHIOW TlWHDX TwHIOW TlWLIWH True IDE PIO Mode Read/Write Timing Specification ModeT6Z TS16G~64GCF400 True IDE Multiword DMA Mode Read/Write Timing Specification True IDE Ultra DMA Mode Read/Write Timing Specification PC Card MEM PC Card IO Mode True IDE Mode Udma Signal TypeMode Udma Pin # NonTS16G~64GCF400 Name Name Comment Name Mode Mode4 UdmaMin Max 14.7Rising Edge Slew Rate for any signal Falling Edge Slew Rate for any signalCard Configuration Multiple Function CompactFlash Storage CardsREG Selected SpaceStop Dmardy Strobe Dmarq Dmack Hioe DMAHIO Inpack REGFunction Mode Attribute Memory FunctionTable Attribute Memory Function DMA CMD REGConfiguration Option Register Base + 00h in Attribute Memory TS16G~64GCF400 Pin Replacement Register Base + 04h in Attribute Memory Socket and Copy Register Base + 06h in Attribute Memory Table Pcmcia Mode I/O Function Transfer FunctionDMA REG Hioe HiowTable PC Card I/O Mode Udma Function Dmardy StrobeDmarq Dmack Stop Hioe Wait DMA A10 Inpack REG HiowCommon Memory Transfer Function Table Common Memory FunctionCE2 CE1 D15-D8 D7-D0 True IDE Mode I/O Transfer Function Metaformat Overview CF-ATA Drive Register Set Definition and Protocol Primary and Secondary Address Configurations Table Primary and Secondary I/O DecodingContiguous I/O Mapped Addressing Table Contiguous I/O DecodingTrue IDE Mode Addressing Memory Mapped AddressingCF-ATA Registers Data Register Address 1F0h170hOffset 0,8,9Feature Register Address 1F1h171h Offset 1, 0Dh Write Only Sector Count Register Address 1F2h172h OffsetSector Number LBA 7-0 Register Address 1F3h173h Offset Cylinder Low LBA 15-8 Register Address 1F4h174h OffsetTS16G~64GCF400 Device Control Register Address 3F6h376h Offset Eh Card Drive Address Register Address 3F7h377h Offset Fh CF-ATA Command Set Command CodeDefinitions Check Power Mode 98h or E5h Execute Drive Diagnostic 90hBit Command Cyl High Cyl Low Sec Num Sec Cnt FeatureTranscend Information Inc Erase Sectors C0hFlush Cache E7h Format Track 50hDrive Cyl High Cyl Low Sec Num Sec Cnt Feature Word Default Total Data Field Type InformationIdentify Device Ech BytesDefault Total Data Field Type Information Word 0 General Configuration Word 1 Default Number of CylindersCF Advanced True IDE Timing Mode Capability and Setting 164 162 0000h Key management schemes supported 163Word 3 Default Number of Heads Word 6 Default Number of Sectors per TrackWord 49 Capabilities Bit 13 Standby Timer PIO Data Transfer Cycle Timing ModeMultiple Sector Setting Total Sectors Addressable in LBA ModeCurrent Capacity Multiword DMA transferWords 82-84 Features/command sets supported Word 68 Minimum PIO transfer cycle time with IordyWords 85-87 Features/command sets enabled Word 88 Ultra DMA Modes Supported and SelectedWord 91 Advanced power management level value Word 160 Power Requirement DescriptionWord 89 Time required for Security erase unit completion Word 128 Security Status Bit 8 Security LevelValue Current PIO timing mode selected Maximum PIO mode timing selectedMaximum Multiword DMA timing mode supported Additional Requirements for CF Advanced Timing ModesValue Current Multiword DMA timing mode selected Maximum Pcmcia IO timing mode SupportedMaximum Memory timing mode Supported Value Maximum PC Card I/O Udma timing mode Supported Value Maximum PC Card Memory Udma timing mode SupportedValue PC Card Memory or I/O Udma timing mode Selected Idle 97h or E3h Idle Immediate 95h or E1hInitialize Drive Parameters 91h NOP 00hRead Buffer E4h Read DMA C8h Read Long Sector 22h or 23hTS16G~64GCF400 Seek 7Xh Set Features EFh Request Sense 03hFeature Supported TS16G~64GCF400 Standby Immediate 94h or E0h Translate Sector 87h Translate Sector InformationWear Level F5h Write Buffer E8h Write DMA CAh TS16G~64GCF400 TS16G~64GCF400 Error Posting Error Register Status RegisterNOP BBKBBK UNC Idnf Abrt Amnf Drdy DWF DSC Corr ERR Smart Command Set Smart Command Set Smart Feature Register ValuesSmart Data Structure DescriptionSMI Ordering Information Transcend Product CapacityCompactFlash Card

TS16G-64GCF400, 400X specifications

The Transcend Information TS16G-64GCF400, 400X is a high-performance CompactFlash card designed specifically to meet the demanding requirements of professionals in photography, video production, and data-intensive applications. With a capacity of 64GB and boasting an impressive transfer speed of up to 400X, the TS16G-64GCF400 is ideal for those seeking reliability and efficiency when recording high-resolution images and videos.

One of the standout features of this CompactFlash card is its exceptional read and write speeds. The card can achieve read speeds of up to 90 MB/s and write speeds that can reach up to 60 MB/s. These performance metrics make the TS16G-64GCF400 particularly suitable for burst shooting and continuous video recording, ensuring that every moment is captured accurately and without lag.

In terms of technology, the card utilizes advanced flash memory technology to enhance both speed and durability. Built with a robust construction, it is designed to withstand extreme conditions, making it resistant to shock, temperature fluctuations, and high humidity. This resilience is particularly important for users who often work in unpredictable environments or travel frequently.

The TS16G-64GCF400 is also equipped with the Ultra DMA mode, allowing for faster data transfer between the card and the camera or device it is used with. It supports both PIO and multi-word DMA modes, ensuring compatibility with a wide range of devices. Furthermore, it adheres to the CompactFlash Association's CF4.1 specifications, ensuring that users can rely on its performance across a variety of applications.

Another characteristic worth mentioning is the card's data security features. The Transcend TS16G-64GCF400 incorporates Error Correction Code (ECC) technology to detect and correct potential data corruption, ensuring that files remain intact over time. Additionally, it has built-in wear leveling technology to promote the distribution of write and erase cycles evenly across the memory cells, ultimately prolonging the lifespan of the card.

In conclusion, the Transcend Information TS16G-64GCF400, 400X CompactFlash card stands out in the competitive market of storage solutions. With its impressive speed, durability, and advanced features, it is an excellent choice for professional photographers and videographers who demand high performance and reliability in their storage devices. Whether capturing the next big moment or storing essential data, this card is sure to deliver the performance users need.
Top Page Image Contents