Kyocera Fs-4020dn, Fs-2020d Deleting a Prologue/Epilogue File, Assigning a Prologue/Epilogue File

Advanced

2

3

Make your changes to the file.

Save the file, and exit Microsoft Notepad.

Note: Editing and saving a command file overwrites the contents of the existing local or network file.

Deleting a Prologue/Epilogue File

1

2

In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file name from the list, and then click Delete.

In the delete confirmation box, click Yes to accept.

Note: Only the file name is removed from the command file list. The file itself is not deleted, but remains on the network or local computer.

Assigning a Prologue/Epilogue File

1

2

In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file name from the list.

Under Insertion Point, select a place to insert the Prologue/Epilogue file.

Unassigning a Prologue/Epilogue File

If you designate a Prologue/Epilogue file as unassigned, you are removing it from the print job. It remains in the list. Unassigned selections are useful when the list contains several Prologue/Epilogue files, and you want to use some but not others.

1

2

In the Prologue/Epilogue dialog box, select a Prologue/Epilogue file name from the list.

Under Insertion Point, select Unassigned.

Specifying the Insertion Point

The insertion point is the location in the print job where the selected Prologue/Epilogue command file is processed by the printing system. Each file in the list can be assigned only one insertion point.

Note: The Start of the page and End of the page insertion point options are available only when PCL 5e is selected as the PDL.

With a command file selected in the list, choose one insertion point option:

Unassigned

The selected command file is not inserted into the print job. This selection can be used when you are working with multiple command files and want to use some but not others. Select Unassigned for the command files you do not want to use in the print job.

Beginning of the print job

KX DRIVER 9-2