Kyocera Fs-2020d, FS-3920DN manual Disable Face-Up Reverse Page Order, Ignore Application Collation

Device Settings

source macros exist for the older driver, then the alignment of media source values maintains support without the need to change the macros.

Setting Media Sources

1

2

3

Use the Driver Info utility (\Utility\Driver Info\DrvInfo.exe) to compare the source values for all installed drivers.

If the values for a given media source differ between printer drivers, you can reassign an enumerated value to create a match between the drivers.

In the Device Settings tab, select Compatibility.

From the Media source enumeration list, select the paper supply method. The current value is listed in the Enumerated value box.

Type an Enumerated value for the media source, and click Apply. To align settings with a different driver, this value should align with those in the other driver.

You can restore all the options in Compatibility Settings to the default by clicking Reset.

Disable Face-Up Reverse Page Order

With Disable face-up reverse page order selected, the face-up job produces the first page on top and the last page on the bottom.

With the check box selected, face-up reverse page order is disabled.

With the check box cleared, the default reverse page order is enabled.

Note: Disable face-up reverse page order is not available for some models.

Ignore Application Collation

This option bypasses the Collate setting in software applications, and gives priority to the printer driver setting.

With the check box selected, the printer driver Collate setting is used.

With the check box cleared, the application Collate setting is used.

Selecting Printer Driver Collation

1

2

You can ignore the collation setting in the application and use the printer driver collation setting.

In the Device Settings tab, select Compatibility.

Select Ignore application collation.

You can restore all the options in Compatibility Settings to the default by clicking Reset.

Combine Source and Media Type Lists

You can change the driver's Basic tab so that Media type and Source are combined into one list, labeled Source. In the combined list, Media types are listed first, followed by cassettes and MP tray.

KX DRIVER 2-14