B&K CT602, CT600, CT310, CT610, CT300 user manual Memory Backup, Setup RS-232 Slave Control

Page 81

	77
Control System Setup

SETUP RS-232 SLAVE CONTROL

1	Enable Slave Control		Yes
2	Transmit ID		ALL
3	Enable Port A		Yes
4	Enable Port B		Yes
5	Enable Port C		Yes
6	Enable Port D		Yes
7	Enable Port E		Yes
8	Enable Port D		Yes
	↑↓ next item	adjust	←→
	MENU setup control
	SETUP RS-232 SLAVE CONTROL
1	Enable Slave Control		Yes
2	Transmit ID		ALL
3	Enable Port A		Yes
4 Enable Port B			No
5	Enable Port C		Yes
6	Enable Port D		Yes
7	Enable Port E		Yes
8	Enable Port D		Yes
	↑↓ next item	adjust	←→

MENU setup control

Parameter 7 - “Setup RS-232 Slave Control” enables you to set up communication between multiple connected B&K products.

The Transmit ID is normally set to ALL. If ALL is select- ed, control of any connected B&K products will then be possible. However, if you select the ID# of a specific B&K product, only that unit will be controlled. This is useful if several B&K products are interconnected for other purposes.

There are two options that can be selected.

YES (Default) - Enables all RS-232 commands to be transmitted out the zones port.

NO - Only disables only auto BKC-DIP commands from being transmitted out the zones port.

Note: RS-232 macro strings and Keypad feedback infor- mation will still be transmitted out the zones port.

MEMORY BACKUP/RESTORE

1 Memory Operation

Backup

save all setting to

EEPROM Memory

SEL do it adjust ←→

MENU main menu

Memory Backup

When Memory Backup/Restore is highlighted, press the SEL/ENTER key to backup all system settings to the

EEPROM.

To Retore all system settings, use the Left/Right keys to change the option to RESTORE. Press the SEL/ENTER key to restore all settings that were previously backed up on the EEPROM.

If the system has never been backed up, selecting RESTORE will restore the unit to factory default.

Refer to page 23 for CT602/CT300 reset procedure.

B & K

S I M P LY B E T T E R !

Image 81

Contents 13226 Accessories Included Installation and System Diagrams Parts and Accessories GuideSetup Using a PC and BKcSuite BKcSuite Setup and OverviewOn Screen Main Menu SpecificationsIntroduction / Overview Finesse and Power To Please a HouseholdCT Receiver Features and Benefits Point Any Remote Control at the Keypad CK1.2 Keypad Features and BenefitsCK1.2 Keypad Features and Benefits Status Feedback to KeypadsCT Receiver Front Panel CT602/600/300 Parts and Accessories GuideS E CT Receiver Back PanelProgramming Jack Behind the Faceplate CK1.2 Front Panel / Back PanelMZ-128 Remote Control RJ-45 to 5 position Phoenix Adapter P/N CT-1 System Integrator P/NDB-9 to RJ-45 Adapter P/N13290 BK Toolbox CD-ROM P/NInstallation and System Diagrams Installation and System DiagramsBasic System Hookup Default Operation Placement and VentilationInstallation Considerations Connection StrategyAccommodate up to 12-gauge wire AC Power and Line FuseSpeaker Connections for CT Receiver Speaker Connections CT310CT Receiver Speaker Connections Example CT Receiver Six Zone Speaker ConnectionsExample connection of a CK1.2 Keypad Keypad ConnectionsCK1.2 Keypad Connections Common GroundCT Receiver cannot receive RS-232 via this terminal Left Control Card Adding Additional Keypads in the Same ZoneCT Receiver Connection Shared Source ConnectionsIR Flasher Emitter Output Buffered OutputsIR Emitter Outputs Zone Line Outputs Zone Line OutputsChanging Line Level Outputs From Fixed to Variable Dedicated Source Inputs LocalFixed Output / Variable Output Local Source IR Control Local IR Source ControlCommon Control Triggers CT Receiver Common Control Connection and TriggerCommon Control Triggers RF Remote Factory ResetAM Loop Antenna FM AntennaSystem Expansion System ExpansionCoupling Two CT Receivers Maximum 12 Stereo Zones Connecting Two CT ReceiversSwap Cable Between Two CT Receivers Should not be connected between RJ- 45 jacksSeventh Zone Connection Diagram No identical Adding a 7th Zone Using The AVR507/505/50 Second ZoneAdding a 7th Zone SourcesCT-1 IR Routing System Integrator Swap Cable ConstructionCAT5 T568B Swap Cable RS-232 Swap CableCT610 #3 CT610 #2 Basic Expanded System Using a CT-1Source Control Using a CT-1 CT-1 Power Connection 12VDCCT-1 Expansion RS-232 Connection Adding a Home TheaterUsing a Swap Cable to Control a Theater Setup Using a PC and BKcSuite Setup Using a PC and BKcSuiteCT Receiver Connection Connection to a PCComputer Connection USB to Serial AdapterBKcSuite Setup and Overview BKcSuite Setup and OverviewBKcSuite Task Bar Explained BKcSuite Task Bar ExplainedBasic Setup Menu Basic Setup MenuAdvanced Setup Menu Advanced Full Setup MenuHardware Zone Settings Tab Maximum Level Limits the Output whether Fixed or Variable Fixed or Variable Levels for Stereo ZonesLeft and Right Level Calibration Fixed or Variable Levels for Mono ZonesSub-Zoning Splitting a Zone To MonoCode-Set Description and Overview Code-Set Description and OverviewGroups / Code Sets / Zones Tab M P LY B E T T E R Input Settings Tab Input Settings To Compensate LevelsShared Source Input Names Dedicated Source Input NamesPower On Titles Tab Power On Preference Select Power On SettingPower-On Preferences Tab Select Code SetSelection Mode Input ModeInput Configuration Tab Release TimeAction Activated By/ Event Tab Event LevelFront Panel Brightness Individual Zone DisplayDisplay Tab Zone Control Out Zone ControlHeadphone 12V Control TabIR Flasher Settings Tab Zone Rear Data In SettingFlasher Outputs Front Panel IR to Flasher OutputsFront Panel Buttons Setup Menu VisibleFront Panel IR Memory LockedRS-232 Echo Enabled RS-232 Port EnableBaud Rate RS-232 Receive & Transmit IDRS-232 Feedback Selection Continuous Reply V2.0 EnabledConvert IR to BKC-DIP Messages Transmit BKC-DIP to ZonesFavorite Preset Recall Recall Volume In PresetPreset Operation Tab Auto NamingKeypad Feedback Tab Preset Editor Features and Benefits Opening the Preset EditorPreset Editor Editing Presets Preset Editor WindowRS-232 Serial Macro Editor RS-232 Serial Macro EditorCK1.2 Keypad CK1.2 KeypadSetup Using the On Screen Display Setup Using the On Screen DisplayCT Receiver On Screen Display Menu Structure OSD On Screen Menu Tree DiagramUsing a Remote Control Using The Remote Control and On-Screen MenusOn Screen Menu Operation with the MZ-128 CT610 / CT310 CT602 / CT300 No front panel operationFront Panel Buttons On Screen Main Menu Main MenuZone Operation Zone Favorite Presets MenuInputs Sub-Menu Audio/Video System SetupNaming an Input Main Menu Sub-menu’sZone Menu when set to Mono Menu Items for a Dedicated InputAudio / Video Submenu Page/Event Setup Zone Power On SettingsDisplay Setup Control Menu SetupZone Code-Sets/Names and Group Titles Control System MenuCode Set Zone Code-Sets/Groups and Group TitlesFlasher Out Common Control I/OIR Routing for Identical Components Flasher OutputIR to Flasher Out Power On Titles Presets SetupPreset Volume Preset NamesControl System Setup Security OptionsRS-232 Options Setup RS-232 Slave Control Memory BackupSystem Status Main Menu SetupZone Planning Worksheets # of Volume ControlsCT Receiver Input Planning Cable Calculation Source Distance for Home Run TotalInput Planning Worksheet CT Receiver Preferences and Presets Power On Preferences and PresetsProject Manager Date Troubleshooting Guide For BKcSuite Troubleshooting Guide for CT ReceiversProblem Possible Solution Returning Equipment Limited WarrantyCT610/602 CT600 CT310 CT300 Specifications