
DeterminingEvery Ethernet device hasthea uniqueReplayTVhardware number.MACFollow(Mediathese stepsAccessto find theControl)ReplayTV MacAddressaddress.
1Go to the DOS or Command prompt on your PC.
2Type “Ping (ReplayTV’s IP address)” and press Enter.
3Type “Arp
You will see a list of hardware addresses and associated IP addresses. Look for the hardware address associated with ReplayTV’s IP address.
FindingYour router willthehaveRouterboth a WANIP(External)Addressand LAN (Internal) IP address. If you are specifying the IP address on ReplayTV, the
information you will use to set up | will come from the LAN settings. |
•Check the documentation that shipped with your router. It normally has the default IP settings.
• If supported, use Netscape or Internet Explorer to look at the configuration settings | your router. For most routers, all you | |
need to do is enter | IP address of the router into your Web browser. |
|
•Use the included software that shipped with your router to check its IP settings.
• If you have a PC connected to the router, you can use IPCONFIG or WINIPCFG your PC to get the IP information you will need. See “Finding your Computer’ Network Information” on page 19 for further details.