FindingIf your home networkyourdoesComputer’snot have a DHCPNetworkserver (a router,Informationexample), you will need to manually set the IP address on ReplayTV. You can use the network information from your computer to determine what the IP address should be. Following are steps to find this information for common computer systems.
1Go to the Start9xmenuorMillenniumon your PC and select Run.
2Type WINIPCFG and select OK.
3Select the correct network adapter from the menu.
The network adapter from which you collect information must be connected to ReplayTV or to the same network (e.g., hub or router) as ReplayTV.
•Go to the Command2000prompt on your PC and type IPCONFIG /all.
The network adapter from which you collect information must be connected to ReplayTV or to the same network (e.g., hub or Windowsrouter) as ReplayTV.
1Go to the networkXPand dialup connections folder.
2Select the appropriate LAN connection.
3
4Click on the Support button. The information for that adapter will display in the window.
The network adapter from which you collect information must be connected to ReplayTV or to the same network (e.g., hub or router) as ReplayTV.
•Go to the CommandNTprompt on your PC and type IPCONFIG /all
The network adapter from which you collect information must be connected to ReplayTV or to the same network (e.g., hub or router) as ReplayTV.
TheseMacintoshinstructions do not apply to Mac OS X. 1 Go the Apple menu.
2Select Control Panels.
3Select TCP/IP. The information you need is located here: IP address, Subnet Mask, Gateway address (router), DNS address.
Some older Macintosh computers may have a MacTCP control panel instead of a TCP/IP control panel.