Intellinet Network Solutions INT-PSNC-UM-1106-06 Pro Series Digital PTZ Wireless Network Camera

Page 104

Pro Series Digital PTZ Wireless Network Camera 550482

MPEG4 + M-JPEG Dual Mode, 2.0 Megapixel CMOS, PAL/NTSC

Standards

•IEEE 802.3 (10Base-T Ethernet)

•IEEE 802.3u (100Base-TX Fast Ethernet)

•IEEE 802.3af (Power over Ethernet)

•IEEE 802.11b (11 Mbps Wireless LAN)

•IEEE 802.11g (54 Mbps Wireless LAN)

General

•32-bit ARM9 RISC CPU

•16 MByte video frame buffer, Image buffer: 200 frames (CIF)

•8 MByte flash memory, 32 MByte SDRAM

•Supported image resolutions: D1 (720 x 480), VGA (640 x 480), CIF (352 x 240)

•Video frame rate: max. 25 fps @ D1; 25 fps @ VGA; 25 fps @ CIF

•Audio support:

-Full duplex

-Bandwidth: 300 Hz – 3.4 kHz

-Audio input: 3.5 mm / 1.8" microphone input jack

-Audio output: 3.5 mm / 1.8" speaker output jack

•Protocols supported: TCP/IP, UDP, HTTP, HTTPS, FTP, SMTP, DHCP, DNS, ARP, ICMP, RTSP, RTC

• Certifications: FCC Class B, RF: EN300328, EMC: EN301489-1/-7, Safety: EN60950-1

Wireless

•Data rates:

-IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps)

-IEEE 802.11g (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps)

•Data encryption: WEP (64-bit & 128-bit), WPA- and WPA2-PSK (with TKIP and AES authentication)

•Antenna: single detachable dipole antenna with RP-SMA connector, 2 dBi gain

•Operation modes: Infrastructure, Ad Hoc, Preamble modes: long, short, auto

Image Sensor and Lens Specification

• 1/3.2" Micron Progressive Scan CMOS sensor

• 2.0 Megapixel resolution (1,668 H x 1,248 V)

•S/N ratio: 42.3 dB (max.), Pixel size: 2.8µm x 2.8µm

•Shutter type: Electronic rolling shutter (ERS)

•Automatic on-the-fly defect correction, exposure, white balance, black reference, flicker avoidance and color saturation

•Manual brightness, contrast, saturation, hue, sharpness control

•Manual white balance control

•Minimum illumination: 0.1 lux

•Focal length 6.0 mm, angular field of view 53˚, object distance 1 m to infinity

LEDs

•Power

•Network connection

•Camera operation

Environmental

•Dimensions: 87 (W) x 158 (L) x 45 (H) mm (3.4 x 6.2 x 1.8 in.)

•Weight: 1.1 kg (2.34 lbs.)

•Operating temperature: 0 – 50°C (32 – 122°F), Storage temperature: 0 – 60°C (0 – 149°F)

•Operating humidity: 20 – 80% RH, non-condensing

Power

• External power adapter: 12 V DC, 1.5 A, Power consumption: 6.0 Watts (maximum)

System Requirements

•Windows 2000, XP, Vista, Linux, Mac OS X

•Computer with network connection

•Web browser support:

-MS Internet Explorer 5.0 or higher (ActiveX + Java)

-Mozilla 1.x, Mozilla Firefox (Java)

-Opera (Java), Safari (Java) and Konqueror (Java)

Package Contents

•Pro Series Digital PTZ Wireless Network Camera

•User manual

•External power adapter

•Software CD

104

Page 103 Page 105
Image 104
Page 103 Page 105
Contents PRO Series INT-PSNC-UM-1106-06Table of Contents Radio Transmission Regulatory Information SafetyElectromagnetic Compatibility EMC Important Notices Video Standard and Product ClassificationAbout the Pro Series Network Cameras and Video Servers Main Features and BenefitsProduct Overview Package Contents Physical DescriptionRear View Operating Status LED Power LEDMPEG4 CCD and Cmos Camera Front View MPEG4 CCD IR Camera Power Connector Ethernet Reset Speaker OutNetwork Video Server Video Input Video Output On Air Network LEDVandal Proof Dome Camera Front View Dome GlassTamper-proof screws Vari-focal lens 4-9 mmNetwork Activity LED Jpeg Cmos Camera 550710 Front/Top ViewImage Capture LED Installation Summary and Examples Network ConnectorRS232 Connector Power ConnectorPage Assigning an IP Address and Accessing the Camera’s Homepage Connecting the Camera to a PCSetting up the IP Address Using IP Installer Accessing the Camera’s Homepage Starting the Web BrowserMS Internet Explorer MPEG4 Stream Mode Username and Password Behind a FirewallActiveX Installation for MS Explorer Users automatic Page Homepage Options MPEG4 Cameras Save Snapshot Video SizeAudio Administrator Menu Install XviDRecord Video LogoutHomepage Options Jpeg Cmos Camera ExpansionFrame rate Show Only ImageReplacing the Lens Adjusting the Camera LensAdjusting the Focus Administrator Menu Overview of the Administration MenuBit Rate Rate ControlQuality Page Resolution Display Name/Location StampDisplay Time/Date Stamp Vertical Flip and Horizontal FlipContrast De-InterlaceBrightness Load Default Values HueSaturation Color KillerMPEG4 Cmos Cameras Auto ExposureMinimum Image Sensor Rate Auto White BalanceBrightness Mode Jpeg Cmos CameraCompression Rate Image SizeExposure Mode Back LightFurther Reduce Exposure Time Indoor / OutdoorPage Upgrade Port Number Set IP address, Subnet Mask, Gateway AddressSet Dhcp Send an IP address to EmailUse Smtp Authentication ID, PasswordDdns Manual Update Rtsp Port NumberJpeg Cmos Camera Password Maximum Frame RateAuthority PTZ Only Digital PTZ Camera modelsJpeg Cmos Camera Event Trigger Configuration Trigger ConditionTop Middle Bottom Left Right MiddleMiddle Image Capture Option Before eventImage Capture option limitation Jpeg Cmos Camera System Configuration Operation Mode and Output Stream TypeDirect Public Access to Image via Http Camera NameImage File Name Audio On/OffVideo On/Off LED On/OffPage Wireless Security Settings Wireless Configuration for wireless cameras onlyWireless Setup Page WPA & WPA2 personal Infrastructure Mode Ad hoc ModePoE Midspan PoE Power over Ethernet SupportPower over Ethernet PoE Injector Power over Ethernet Injector PoE Office SwitchPoE Web-Smart Switch Installation Multi-Viewer Application for WindowsConfiguration Camera Information Adding a cameraPage Getting Started Setting up the camera in Etsp ClientEtsp Client Click Add Define the location where Video should be saved Page Page Rtsp Video Playback Rtsp Playback in MPlayer for WindowsPage SSL Encryption / Access via Https Access to the camera via HttpsPage Remote Access to a Camera & Router Setup MPEG4 Network Camera default valuesClick on NAT Virtual Server. Check x Enable Virtual Server Page Page Developer Information Software Development Kit SDKWeb Integration MS Visual Studio C++, Visual BasicDirect Access to internal Jpeg Direct public access to image via HttpMotion-JPEG Access Appendix a Frequently Asked Questions FAQ IP Installer does not find the camera. Why?Sender e-mail address max characters Use Smtp Authentication Camera does not send any e-mails. Why? How do I activate the FTP upload function?Why won’t the ActiveX control automatically download? ShortPage Appendix B Accessing the camera via HyperTerminal Configure the parameters as shown below All MPEG4 models Appendix C Troubleshooting Symptoms Possible causes Remedial actionsPINGing Your IP address Ping reply Interpretation and recommendationHub-to-hub cable Appendix D Utilizing IP Addresses on a Local Network Page Identify the Version of Firmware Download New Firmware Install New FirmwareAppendix E Updating Firmware PIN Appendix F The I/O Connector MPEG4 CamerasFunction Description How to Use the DynDNS Ddns Server Appendix G Dynamic Domain Name System DdnsPage Page Page Ddns Registration for the Pro Series Network Camera Appendix H Reinstating the Factory Default Settings Pressing the Reset ButtonUsing HyperTerminal Factory default settingsAppendix I Glossary of Terms Page Appendix J Product Specifications Pro Series Network CameraMPEG4, CCD, Day/Night, Ntsc Pro Series Wireless Network Camera Pro Series Wireless Network Camera Pro Series Night Vision Network Camera MPEG4, CCD, Day/Night, IR Lens, PAL100 Pro Series Wireless Night Vision Network Camera 102 Pro Series Digital PTZ Network Camera MPEG4 + M-JPEG Dual Mode, 2.0 Megapixel CMOS, PAL/NTSCPro Series Digital PTZ Wireless Network Camera Pro Series Network Video Server MPEG4 + M-JPEG Dual Mode, Two-way Audio, PAL/NTSCJPEG, CMOS, PAL/NTSC 107 108
Top Page Image Contents