Profile List
Profile List | The “Profile List” allows you to manage the networks you connect to |
| frequently. The profile list displays all the profiles and their |
| corresponding settings, including Profile Name, SSID, Channel, etc. If |
| you want to connect to any of the profiles on the list, |
| profile or select the profile and click “Activate”. The network camera |
| will then automatically connect to the selected profile. |
Add/Delete/Edit Button | Click these buttons to add/delete/edit the selected profiles. |
Activate Button | Click “Activate” to connect to the selected profile. When a profile is |
| activated, the card will initially be connected to the profile. |
|
|
Configure the Profile |
|
Profile Name | Allows you to define a recognizable profile name so that you can |
| identify the different profiled networks. |
SSID | The SSID (up to 32 printable ASCII characters) is the unique name |
| used to identify a wireless LAN (WLAN). The ID prevents the |
| unintentional merging of two |
| You may specify an SSID for the card and then only the device with the |
| same SSID can interconnect to the card. If you want to add one of the |
| networks nearby to the profile list, pull down the menu, and all of the |
| networks nearby will be listed. Thus, you can add one of them to the |
| profile list. |
Channel | This setting is only available for Ad Hoc mode. Select the number of |
| the radio channel used for networking. The channel setting should be |
| the same as the channel of the network you are connecting to. |
Network Type | Infrastructure: This operation mode requires the presence of a Wireless |
| LAN Access Point or Router. All communication occurs via the |
| Access Point or Router. |
| |
| station in the Wireless LAN network without an Access Point or |
| Router. Select this option if you want the network camera to operate in |
|
26