Hawking Technology HNC290G manual Motion Detection

The HNC290G features built-in motion detection with snapshot emailing. In order to utilize this feature, you will have to enable it either in the “Network Settings” section of the camera’s web UI, or in the “Motion Detection” section of the Administrator Utility, as shown in the figure below. Once enabled, the system will email still image snapshots to the person or party specified in the “Email Address” field, as detailed in the “Change Email Account” section from the previous page in this user’s manual. The user can define the number of snapshots to be emailed for each detected event, as well as the frequency with which he/she wants events to be detected. Please see the instructions below.

Motion Detection

Enable Motion Detection	Motion detection is disabled by default.	Click on “Enable” to begin
	using the motion detection function.
Frames per Event Detection	In this field, the user can select the number of still-image snapshots
	he/she would like to be emailed per instance of detected motion. The
	field is set at “3” by default.
Interval Between Next Event	In this field, the user can select the interval of time, in seconds, he/she
Detection (secs.)	would like between consecutive events	for motion detection. The
	default setting is “10 seconds”. Please note that this camera does not
	have the capability to detect motion continuously.
Apply	When you finish in the “Motion Detection” section, click “Apply”.

57