6.2.10 Tools
Tools
Firmware Version | Displays the current version of the firmware. |
Firmware Update | Users cannot use the Admin utility to upgrade the firmware in this |
| version of the utility. Please upgrade the firmware via the web user |
| interface. |
Reset to Default | If you want to reset the camera to its default settings, click this button. |
| The default settings of the camera are as follows: |
| Camera Name: “WIPCamera_MJPEG” |
| IP Address: “192.168.2.3” |
| Subnet Mask: 255.255.255.0 |
| Administrator Name: “Admin” |
| Password: “1234” |
| Video Port: “5000” |
| Web Port: “80” |
LED Light Off | Users can click on this button to turn off the camera’s LED lights. This |
| may help to make the camera less noticeable or to give it the |
| impression that it is not in use when, in fact, it is. |
35