4.1 LEDs and Focusing
The camera head and its focus ring allow you to modify the aim and focus of the camera. To adjust the camera’s focus, rotate the dark focus ring in either direction until the desired viewing area or object becomes sharp/clear.
There are four LEDs that indicate camera and network status:
yPower
The LED will be lit orange when the device is powered on and ready for access.
yLink
When the camera is monitoring, the LED will be lit green.
yWLAN
When the network camera is linked to a wireless LAN access point or a wireless station, the LED will be lit green. The LED will flash when video is transmitted or received via the wireless network.
yLAN
When the network camera is linked to a wired network, the LED will be lit green. The LED will flash when video is transmitted or received via the wired network.
LED:
WLAN
LED:
Lens & ManualLAN
Focus Ring
LED: Power |
| LED: Link |
|
|
|
|
|
|
8