3.Opening Ports
You will need to open unique ports for each camera in order to be able to view them remotely over the Internet. You will need to open these ports in the “Network Settings” section of the camera’s homepage for two reasons: a. if you need to use ports other than the default Web Port 80, and Video Port 5000, and b. when more than one camera is being installed on the network. Please note that if you are using only one camera, you can use the default ports without having to open a second port. Please also note that when installing the camera behind a router, you will need to open the corresponding ports (same as the open camera ports) on the router for remote viewing (i.e., over the Internet). In some instances when installing behind a router, Port 80 may not be available; please check your network settings or with your ISP to confirm. In the “IP Setting” section within the “Network Settings” section of the network camera’s homepage, the “Video Port” and “Web Port” fields allow for the opening of ports for the network camera. This will permit users’ routers to support multiple network cameras. By default, Port 80 (on the router) is always open for network camera web server access. For each additional camera that you intend to install, to enable remote viewing, you will need to assign unique Web and Video ports.
69