Hawking Technology HNC290G manual Control Buttons

7.4 Control Buttons

Snapshot

Stop Record

Control Buttons

Pause

Play

Close the Camera Viewer

Minimize the Window

Forward

Play	The Play button is an intelligent play user interface. In the normal
	display mode, if the camera is disconnected, clicking on the Play will
	make the viewer connect to the camera. In playback mode, clicking on
	the Play button will play the video at normal speed.
Stop	The Stop button is an intelligent play user interface. In the normal
	display mode, if the camera is connected, clicking on the Stop button
	will make the viewer disconnect from the camera. In playback mode,
	clicking on the Stop button will stop the video play.
Pause	The Pause button provides you with a way to pause the video while it
	is playing. When the video is paused, click on the Play button again to
	resume the video display.
Forward	The Forward button allows the user to forward the speed of playback
	when he/she is playing the recorded file. Each click of the button will
	increase the playback speed one time.
Snapshot	Clicking the Snapshot button will make the viewer take a still-image
	snapshot of the video and save it as a bitmap file in the hard disk. (You
	can learn how to set the directory for storing these bitmap files in
	Section 7.8.4.)
Record	By clicking on the Record button, you can begin recording video
	immediately.

41