Network Information | Hawking Technology HNC290G specification

Configure the Profile

Authentication Type	Allows you to select between “None”, “Open System”, “Shared Key”,
	and “WPA-PSK”.
Encryption Type	Select the type of encryption that your wireless network is using. If
	you are unsure about the type of encryption your wireless network is
	using, you can refer to your router’s or gateway’s settings for details.
WPA Pre-Shared Key	If your wireless network uses WPA encryption, type in your WPA key
	in this field.
Key Length	You may select either the 64-bit or 128-bit option to encrypt
	transmitted data. A larger key length will provide a higher level of
	security, but the throughput will be lower.
Key Format	Hexadecimal: You can only use the following characters to set the
	WEP key in this format: “A-F“, “a-f“ and “0-9“.
	ASCII: Numerical values, characters or signs are acceptable for this
	WEP key format. This is usually the easier option for most users.
Default Key	Select one of the keys (1 - 4) as the encryption key.
Key1 - Key4	WEP keys are used to encrypt data transmitted over the wireless
	network.
	Fill in the text boxes by following rules below.
	64-bit: Input a 10-character Hex key (using “A-F”, “a-f” and “0-9”) or
	a 5-character ASCII key (using “a-z” and “0-9”). For example:
	“0123456aef” (Hex) or “test1” (ASCII).
	128-bit: Input a 26-character Hex key (using “A-F”, “a-f” and “0-9”) or
	a 13-character ASCII key (using “a-z” and “0-9”). For example:
	“01234567890123456789abcdef” (Hex) or “administrator” (ASCII).

Network Information
Network Information List	This list shows detailed network information for the selected network in
	the Available Network list. The information includes: Network Type,
	SSID, Channel, BSSID, Encryption Setting and Signal Strength.
	BSSID refers to the MAC Addresses of the wireless devices.