Encryption Settings | Hawking Technology HNC290G specs

Channel	This setting is only available for Ad Hoc mode. Select the number of
	the radio channel used for the networking. The channel setting should
	be the same as the network you are connecting to.
Site Survey	Click the “Site Survey” button to search all the available wireless LAN
	networks in the vicinity of the network camera.

Encryption Settings
Encryption Mode	Disable: Disables the encryption function for the wireless data
	communications.
	WEP64: Enables the 64-bit data encryption function. If you select this
	option, a set of WEP64 key fields will appear below the “Encryption
	Mode” setting.
	WEP128: Enable the 128-bit data encryption function. If you select
	this option, a set of WEP128 key fields will appear below the
	“Encryption Mode” setting.
	WPA: If your wireless network uses WPA encryption, a “WPA Pre-
	Shared Key” field will appear below the “Encryption Mode” setting.
	You can type in your pre-shared key in this field.
Key Type (for WEP64	HEX: Only the characters “A-F“, “a-f“ and “0-9“ are permitted for
or WEP128)	HEX format.
	ASCII: Numerical values, characters or signs are permitted for ASCII
	format. This format is generally easier for most users.
Default Key	Select one of the keys (1 - 4) as the encryption key.


Encryption Setting
Key1 - Key4 (for WEP64	The WEP keys are used to encrypt data transmitted over the wireless
or WEP 128)	network.
	Fill in the fields by following the rules below:
	64-bit: Input a 10-character Hex key (in the “A-F”, “a-f” and “0-9”
	range) or a 5-character ASCII key (including “a-z” and “0-9”) as the
	encryption key. For example: “0123456aef“ or “test1”.
	128-bit: Input a 26-character Hex key (in the “A-F”, “a-f” and “0-9”
	range) or a 13-character ASCII key (including “a-z” and “0-9”) as the
	encryption key. For example: “01234567890123456789abcdef“ or
	“administrator”.
Apply	When you finish in the “Encryption Setting” section, click this button
	to validate the setting values.