Setting Wizard
Internet Camera Name | The default camera name is “HNC230G”. It is recommended that you |
| enter a name for the camera that is easy to remember. |
IP Address | The wizard will automatically set an available IP Address for the |
| camera. For example, if the IP address scheme for your network is |
| 192.168.2.x, the wizard will search an unused IP Address between |
| 192.168.2.0 and 192.168.2.250, and assign the camera an available IP |
| Address. |
| You may enter another IP Address to change the setting. |
Subnet Mask | The wizard will auto search the network’s Subnet Mask setting and set |
| the camera to the same Subnet Mask. |
| You may enter another Subnet Mask to change the setting. |
Gateway | The wizard will auto search the network’s Gateway setting and set the |
| camera to use the same Gateway. |
| You can enter another Gateway to change the setting. |
Video Port | This defines the video stream port. The default port number is “5000”. |
Cancel | Click “Cancel” to quit the Wizard Setting window. |
Finish | Click “Finish” to complete the camera settings. |
|
|
When you finish with the camera settings, you can click “Ok” to run the “Camera Viewer” immediately or click “Cancel” to run the “Camera Viewer” later.
38