Polaroid 111523 manual S1/S2 PC Board

Repair Manual Macro 5 SLR Camera

S1/S2 PC Board

1.Removal (Figure 5-8)

a.Remove the left/right cover assembly as explained on page 39.

b.Using a small pair of diagonal pliers, cut the ty-wrap securing the S1/S2 electrical cable to the right strobe cable.

c.Disconnect electrical cable J19 from the logic PC board at rear of camera.

d.Using a torx driver, remove the four (4) screws securing the S1/S2 PC board to the right hand grip support mounts.

e.Lift out the S1/S2 PC board.

Note: Be careful not to lose the S1/S2 button spring.

To J19 on

Logic Board

Screws (4)

S1/S2 Button

Spring

S1/S2

Button

Figure 5-8 S1/S2 PC Board

53