Polaroid 111523 manual Reassembly

Repair Manual Macro 5 SLR Camera

2.Reassembly

a.Place the new the S1/S2 PC board onto its right hand grip support mounts.

Note: Make sure the large end of the S1 button spring is inserted into the S1 button before the S1/S2 PC board is placed onto its support mounts.

b.Using a torx driver, install and tighten the four (4) screws that secure the S1/S2 PC board to its right hand grip support mounts.

c.Connect electrical cable J19 to the logic PC board.

d.Using a small ty-wrap, secure the S1/S2 electrical cable to the right strobe cable.

e.Install the left/right cover assembly as explained on page 42.

54