Polaroid 111523 manual Reassembly

Page 56

Repair Manual	Macro 5 SLR Camera

2.Reassembly

a.Connect electrical cable J11 (X-Sync IN/OUT) to the logic PC board.

Note: Be careful not to break the two black wires soldered to the X-Sync receptacle on the control panel.

b.Align the two (2) posts on the control panel with the holes on the logic PC board and then gently push in the control panel. (This connects male connector J27 on the logic PC board with the control panel).

Note: When pushing the control panel onto male connector J27 on the logic PC board be careful not to damage (bend or distort) the connectors pins.

c.Connect the white ribbon cable to the logic PC board.

d.Install the bottom cover as explained on page 48.

e.Install the rear cover assembly as explained on page 46.

f.Install the left/right cover assembly as explained on page 42.

56

Image 56

Contents Rev replaces September Technical Services Burlington Road Bedford MA TEL FAXRepair Manual Contents Other Documents Required for Service Purpose of this Manual Organization of this ManualAdjustments Parts ReplacementCamera Description Theory of OperationSchematics S1/S2 PC BoardCamera Description Important Safety Instructions General Macro 5 SLR CameraFeatures CameraMacro 5 SLR Features Macro 5 SLR Camera Features Cont’d Two Built-InElectronic Flash Units Dual-Light RangefinderBattery Compartment Right/Left Hand GripsRed Shutter S1 Button Control Panel Control PanelControl Panel Features Power ButtonLow Battery Reset ButtonControl Panel Features Cont’d Lighten/Darken ControlsMagnification Status Lights RS232 ReceptacleDate/Time Display Specifications Specifications Cont’d Magnification WeightDimensions AccessoriesTheory of Operation Filter Kit Camera SetupOperation Macro 5 SLR Camera Camera Setup Picture Taking Macro 5 SLR Camera Picture Taking Adjustments Ranging Aim Lights Adjustment Camera Test FixtureRange Light Adjustment Range Light Adjustments Grid Adjustment Grid PositionGrid Adjustments Troubleshooting Diagnostics Module Parts Replacement Macro 5 SLR Camera Required Tools and Equipment Electrostatic Discharge Warning Inspection and CleaningDisassembly/Assembly of Camera Left/Right Cover Includes Front Cover Removal -1, 5-2 and 5-2aCamera Disassembly Left/Right Bottom Screw Location Reassembly Front Cover Removal FigureReassembly Rear Cover Removal Figures 5-2Reassembly Bottom Cover Bottom coverReassembly Strobe PC Board Strobe PC BoardReassembly Trigger PC Boards Trigger PC Boards S1/S2 PC Board S1/S2 PC BoardReassembly Control Panel Reassembly Logic PC Board 10 Logic PC Board Camera Back 11 Camera Back Macro 5 SLR Camera Encoder Plate and PC Board Removal -12 and 5-12a12a Encoder PC Board Reassembly Turret Assembly 13 Turret AssemblyReassembly Shutter Solenoid Assembly 14 Shutter Solenoid AssemblyReassembly Bulb Aim Light Bracket Assembly 15 Aim Light Cable AssemblyReassembly Date Code Module 16 Date Code ModuleReassembly Firmware Logic PC Board 17 Firmware CPU Schematics S1/S2 PC Board Encoder PC Board Trigger PC Board Strobe PC Board 1 Strobe PC Board 2 Logic PC Board 1 Logic PC Board 2 Communication PC Board