Kodak 9810 manual Installing the Printer Driver, Borderless Printing, Click Software

Page 16

Printer Driver Software

Installing the Printer Driver

This procedure will install the printer driver and Diagnostic tool.

NOTE: You must have Administrator privilege to install the printer driver.

1.Press the power switch to off () to turn off the printer.

2.Insert the CD that came with the printer into your CD-ROM drive.

The CD Browser launches automatically. If it does not, double-click the Kodak9810.exe file in the CD root directory.

3.Select your language.

4.Click Software.

NOTE: Before installing the printer driver, read the Printer Driver Readme file for information and updates.

5.Click Printer Driver to start the installer.

IMPORTANT: One or more screens may show the KODAK Photo Printer 8800. The KODAK PROFESSIONAL 9810 Digital Photo Printer will still install correctly. Continue as directed on the screens.

6.Follow the on-screen instructions to install the printer driver and the Diagnostic tool.

The printer driver and Diagnostic tool (see Page 5-1) will be installed.

7.Press the power switch to on ( ) to turn on the printer.

Borderless Printing

For borderless printing, set the size of the image as follows:

Page Size	Image Size


8 x 10	8.213 (20.86 cm) x 10.08 in. (25.60 cm) at 300 DPI
	(or 2464 x 3024 pixels)

8 x 12	8.213 (20.86 cm) x 12.08 in. (30.68 cm) at 300 DPI
	(or 2464 x 3624 pixels)

There are several ways to achieve this such as:

•Crop or resize the image to one of the image sizes shown above.

•Set scaling to 103% (using the printer driver’s Properties / Advanced option).

•Use the Scale to Fill option if your application supports this feature.

2-2

Image 16

Contents Kodak Professional Digital Photo Printer4J5025 Table of Contents Using the Diagnostic Tool Before You Begin Setting Up the PrinterRecommended Air Flow Clearances Loading the Paper Paper roll Move the lever to the locked position Install the trim tray Loading the Ribbon Installing the Print Catcher Connecting the Cables Connecting the power cableTurning On the Printer Page Printer Driver Software Borderless Printing Installing the Printer DriverClick Software Customizing Printer Properties Customizing Printing PreferencesSelect Properties Select Printing PreferencesColor Management using Adobe Photoshop 7.0 or Greater Custom Image Composition Packages Creating a Custom PackageSelecting a Custom Package ExampleResolving Printing Problems Loading the Ribbon onSmaller page size Uninstalling the Printer and Printer Driver Select Start PrintersPrinters Faxes Select File Server PropertiesPage Installing the Calibration Software Calibrating the PrinterUsing the Easy Cal Calibration Utility Select Easy-Cal BeginClick Proceed Click Select Printer Click Change Setup Following dialog box appears Calibrating the Printer Uninstalling the Calibration Software Resolving Calibration Error Messages Ribbon onPage Operating the Printer Using Setup Mode to Review Printer SettingsUnderstanding the Operator Panel Lights Settings PrintWorking in Test Print Mode Changing the quantity of test printsPage Using the Diagnostic Tool Adjusting Print Head and Paper Cutter RegistrationClick Print to print a test Cutter offset Click the Update Firmware tab Updating FirmwareTroubleshooting the Printer Warming Print head is too cold to print Appendix a Important Printer Information Printer SpecificationsEnergy Star Partner Page Appendix B Safety Regulatory Information Important Safety InformationRegulatory and Safety Compliance Safety LabelsSafety Radio frequency interference Noise emission DisposalPage Index Temperature