Kodak 9810 manual Updating Firmware, Click the Update Firmware tab

Page 42

Using the Diagnostic Tool

Updating Firmware

You may occasionally need to update your printer’s firmware.

IMPORTANT: Do not turn off the printer or remove any cables during the download process. If you do, the download will not complete and the previous firmware version will be used.

1.Go to www.kodak.com.

2.Search for the KODAK PROFESSIONAL 9810 Digital Photo Printer.

3.Download the firmware file to your computer hard drive.

4.If possible, have your printer in the Ready state.

5.Click the Update Firmware tab.

6.Click Browse.

7.In the File Open dialog box, navigate to the folder containing the firmware (.rom) file that was downloaded in Step 3.

8.Select the firmware file.

9.Click Update.

A message indicates the approximate download time and an elapsed time indicator shows the progress of the download.

10.If the download was successful, wait for the printer to initialize and for the Ready light to appear.

If the download was not successful, power cycle the printer. If repeated attempts are unsuccessful, obtain service for your printer.

5-4

Image 42

Contents Kodak Professional Digital Photo Printer4J5025 Table of Contents Using the Diagnostic Tool Setting Up the Printer Before You BeginRecommended Air Flow Clearances Loading the Paper Paper roll Move the lever to the locked position Install the trim tray Loading the Ribbon Installing the Print Catcher Connecting the Cables Connecting the power cableTurning On the Printer Page Printer Driver Software Installing the Printer Driver Borderless PrintingClick Software Select Properties Customizing Printer PropertiesCustomizing Printing Preferences Select Printing PreferencesColor Management using Adobe Photoshop 7.0 or Greater Custom Image Composition Packages Creating a Custom PackageSelecting a Custom Package ExampleResolving Printing Problems Loading the Ribbon onSmaller page size Printers Faxes Uninstalling the Printer and Printer DriverSelect Start Printers Select File Server PropertiesPage Installing the Calibration Software Calibrating the PrinterUsing the Easy Cal Calibration Utility Select Easy-Cal BeginClick Proceed Click Select Printer Click Change Setup Following dialog box appears Calibrating the Printer Uninstalling the Calibration Software Resolving Calibration Error Messages Ribbon onPage Using Setup Mode to Review Printer Settings Operating the PrinterUnderstanding the Operator Panel Lights Settings PrintWorking in Test Print Mode Changing the quantity of test printsPage Using the Diagnostic Tool Adjusting Print Head and Paper Cutter RegistrationClick Print to print a test Cutter offset Click the Update Firmware tab Updating FirmwareTroubleshooting the Printer Warming Print head is too cold to print Printer Specifications Appendix a Important Printer InformationEnergy Star Partner Page Appendix B Safety Regulatory Information Important Safety InformationSafety Labels Regulatory and Safety ComplianceSafety Radio frequency interference Noise emission DisposalPage Index Temperature