Kodak 9810 manual Cutter offset

Using the Diagnostic Tool

Cutter offset Page offset

5.Place the two prints together and note the number closest to the following occurrences:

•Cutter offset: the point at which the cut intersects the horizontal line

•Page offset: the point at which the right side of the page intersects the vertical line

6.Enter the Cutter offset and Page offset values. Click Update.

7.Click Print to print another test page and verify the settings.

8.Repeat Steps 2 - 7, if necessary.

NOTE: Ideally the cutter offset and the page offset should be at zero.

5-3