Arcam AVR500 / AVR600 / AV888 manual PVR PVR Device Mode, VCR VCR Device Mode

Page 36

PVR PVR Device Mode

The vDevice Mode button configures the CR102 to control the functions of a video recorder or similar device. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects PVR as the AVR500/AVR600/AV888 source.

PToggles power between standby and on.

0…9

Functions as original remote number key.

 

Selects Tape input on AVR500/AVR600/

PHONO

AV888.

ESHIFT + Eselects PHONO input on the AVR600/AV888.

TV/AV

Toggles between available inputs (e.g. AV1,

rAV2)

SModifies many keys (see individual key descriptions, below)

 

Selects multichannel (MCH) input on

AUX

AVR500/AVR600/AV888.

HSHIFT + Hselects AUX input on the AVR500/AVR600/AV888.

 

Selects iPOD input on AVR500/AVR600/

NET

AV888.

eSHIFT + eselects network (Net) internal input on the AVR500/AVR600/AV888.

Navigate setup and programme selection menus.

OK

OK is equivalent to ‘Enter’ or ‘Select’ on some remotes.

MOperates the Exit function if the PVR uses this feature

UTurns on the Menu function if the PVR uses this feature

DToggles display between TV and PVR

@Toggles the mute function. By default this key operates the AMP Mute

]Channel down

[Channel up

-+ Decrease (–) and increase (+) AVR500/ AVR600/AV888 volume

)Fast rewind

$Play

&Toggles pause of playback

(Fast forward

!Operates the Favourites function if the PVR uses this feature.

#Stop playback

%Starts recording

h(not used)

uDuplicates function of Red key (if used)

(RED)

tDuplicates function of Green key (if used)

(Green)

oDuplicates function of Yellow key (if used)

(Yellow)

bDuplicates function of Blue key (if used).

(Blue)

VCR VCR Device Mode

The wDevice Mode button configures the CR102 to control the functions of a video recorder or similar device. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects VCR as the AVR500/AVR600/AV888 source.

PToggles power between standby and on.

0…9

Functions as original remote number key.

 

Selects Tape input on AVR500/AVR600/

PHONO

AV888.

ESHIFT + Eselects PHONO input on the AVR600/AV888.

TV/AV

Toggles between available inputs (e.g. AV1,

rAV2)

SModifies many keys (see individual key descriptions, below)

 

Selects multichannel (MCH) input on

AUX

AVR500/AVR600/AV888.

HSHIFT + Hselects AUX input on the AVR500/AVR600/AV888.

 

Selects iPOD input on AVR500/AVR600/

NET

AV888.

eSHIFT + eselects network (Net) internal input on the AVR500/AVR600/AV888.

 

Navigate setup and programme selection

OK

menus.

OK is equivalent to ‘Enter’ or ‘Select’ on

 

 

some remotes.

MOperates the Exit function if the VCR uses this feature

UTurns on the Menu function if the VCR uses this feature

DToggles display between TV and VCR

@Toggles the mute function, if available.

By default this key operates the AMP Mute

]Channel down

[Channel up

-+ Decrease (–) and increase (+) AVR500/ AVR600/AV888 volume

)Fast rewind

$Play

&Toggles pause of playback

(Fast forward

! Ejects tape

#Stop playback

%Starts recording

h(not used)

uDuplicates function of Red key (if used)

(RED)

tDuplicates function of Green key (if used)

(Green)

oDuplicates function of Yellow key (if used)

(Yellow)

bDuplicates function of Blue key (if used).

(Blue)

E-34

Page 35 Page 37
Image 36
Page 35 Page 37
Contents AVR500 / AVR600 / AV888 N d b o o k AVR surround amplifier / AV processorSafety Guidelines Important safety instructionsSafety compliance Class II productClass II produit Instructions de sécurité importantesRespect des consignes de sécurité Page Contents Professional Installation?DIY setup? WelcomeBefore you Begin… Power Standby powerPlacing the unit Interconnect cablesTrademark acknowledgements General Making connectionsProduct differences and options Component/RGB Video CompositeAVR600 AV888 Hdmi connectors Zone 3 connectorsComponent/RGB video connectors Zone 2 connectorsConnectors Digital audio Phono Analogue audioTape inputs MCH inputTrigger connectors Infra-red IR connectorsDVD player Satellite receiverCD player Use the Composite connection if HdmiConnecting an iPod using the Arcam rDock Video connectors Component, S-Video and Composite connectors, seeAVR500 Aerials, control and communicationAV, SAT, DVD For more information on connecting speakers, see Subwoofer outputsFront panel Phones socket Trigger connectors VCR, Camcorder, Games Console etc Preferred video hook-up, in order of preference isConnecting an iPod using the Arcam rDock Radio Connectors Aerial connectors AVR500/AVR600 onlySirius DAB optionConnecting an aerial Other Connectors Data connectors Network connectors USB connectorRS232 serial connector RLead/rDockConnecting speakers AVR500 & AVR600 Connecting subwoofersSpeakers Speaker cablesCentre SubwooferFront left and right Surround left and rightSwitching on OperationOperating your AVR500 /AVR600 / AV888 Selecting a sourceUsing Zone 2 Updating firmware using a PCExtended front panel menu Front panel Operation CR102 universal remote controller Inserting batteries into the remote controlUsing the remote control Device Mode / Source keys Useful informationControlling other devices Code blink-backAMP AMP Device Mode IPod commandsOK selects/play the highlighted file TUN TUN Device Mode DVD DVD Device ModeNetwork commands Highlighted menu on the screenSAT SAT Device Mode AV AV Device ModeMenus PVR PVR Device Mode VCR VCR Device ModeCD CD Device Mode Starts Program modeShift + rcycles through the repeat Options track, disc, etcEssential Setup Speaker typesSpeaker Distances Speaker LevelsAuto speaker Setup Auto speaker setupProblems Using a subwooferSetup menus Navigating the setup menuVideo Selecting the video sourceSelecting the audio source Input Config Treble BassGeneral Setup Plii Dimension Plii Centre Width Plii PanoramaGeneral information and system controls Is usedAuto Setup Spkr TypesSpkr Distance Spkr LevelsVideo Inputs Video OutputsProgressive scan playback Important points to rememberZone Settings ModeNetwork For Stereo sourcesEnglish Decoding Modes IntroductionTwo-channel source modes Multichannel source modes Decoding modesSettings Volume LevellerDolby Volume is a sophisticated new Calibration OffsetEnglish Tuning/Channel Selection Saving and selecting PresetsDeleting Presets Tuner OperationSirius errors Default unlock code isAdd to your subscription OperationNetwork/usb Operation Selecting the playback sourceUSB playback Internet radio stationsExternal Amplifiers Analogue pre-amplifier outputs AVR600/AV888 onlyEnglish XLR balanced line outputs AV888 only SW2, SW3Multi-room Set up ZoneZone 3 AVR600/AV888 only Zone 2 and 3 control outputsMulti-room connection guide Zone EnglishCustomising CR102 Code LearningVolume punch-through Creating MacrosKey Mover Mode Mover Locking/Unlocking a specific Device ModeTo restore a moved Device Mode key to its original state Copy a key between Device ModesMode key IR punch-through Resetting the CR102Problem Check that Volume is always too loud When I turn onSwitched off Wired networkSpecifications Continual improvement policyProduct Guarantee Worldwide GuaranteeClaims under guarantee Problems?Device code Tables GBC GECHCM HYDNU-TEC OKIRBM RCAYU-MA-TU AVPGPX STS ADBNTL UPC3D LAB AKIAMW AtacomTSM TVEXMS AsciHNE IdteKPN SATSH222E Issue

AVR500 / AVR600 / AV888 specifications

The Arcam AVR500, AVR600, and AV888 are high-performance audio-video receivers that exemplify Arcam's commitment to delivering exceptional sound quality and versatility in home theater systems. Each model boasts a combination of advanced technologies, robust build quality, and a user-friendly interface, making them popular choices among audiophiles and home cinema enthusiasts.

The Arcam AVR500 is designed for those who appreciate high fidelity sound. It features a 7.1 channel amplifier delivering 100 watts per channel, allowing for immersive audio experiences. The AVR500 supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that users can enjoy their favorite movies and music with rich, dynamic sound. The unit is equipped with extensive connectivity options, including multiple HDMI inputs and outputs, enabling seamless integration with other devices.

Moving up the line, the AVR600 enhances the AVR500's capabilities with additional power and features. It features a more powerful 120 watts per channel amplification and includes advanced room calibration technology known as Arc. This innovative feature optimizes audio playback by analyzing the room’s acoustics and adjusting the sound accordingly, helping to create a more immersive home theater experience. The AVR600 also supports 3D video pass-through and features HDMI 1.4 compatibility, making it future-proof for new video technologies.

At the pinnacle of this lineup, the Arcam AV888 takes a slightly different approach, focusing on becoming a premier preamp/processor that connects to external amplification. The AV888's superior processing ensures audiophiles experience the highest quality sound possible. With support for multi-channel PCM audio and a range of processing formats, users can experience the latest high-definition audio technologies. The unit houses advanced digital-to-analog converters for enhanced sound clarity and supports 4K video upscaling, making it an excellent choice for those invested in the latest visual standards.

All three models share a commitment to high-quality construction, ensuring durability and longevity. The user interface is intuitive, making navigation between functions seamless. This trio of receivers is compatible with various streaming services, allowing music to be enjoyed effortlessly from multiple sources.

In summary, the Arcam AVR500, AVR600, and AV888 provide exceptional sound quality, advanced features, and robust build quality, catering to an array of home entertainment needs. Whether for music or movies, these receivers promise rewarding and captivating listening experiences.
Top Page Image Contents