Arcam AVR500 / AVR600 / AV888 manual General, Making connections, Product differences and options

Page 9

audio/video connections

Important notes about Component/RGB video inputs and outputs

<When you connect your devices to these connectors, take care to follow the letter/colour coding for each input. No damage will occur due to incorrect connection but incorrectly coloured or unstable pictures will result.

<The Component video inputs have sufficient bandwidth for NTSC (525/60) or PAL (625/50) video and HDTV video signals.

Before connecting your AVR500/AVR600 or AV888 and power amplifier (e.g. the Arcam P777) to your source components and speakers, please read through the next few pages which will explain all the input and output connectivity that is available. The ‘Speakers’ section explains how to connect up your speakers to avoid damage to the amplifier and how to arrange your speakers for best performance.

General

The inputs are named to make it easier to reference connected devices (e.g. ‘DVD’ or ‘VCR’). They all have the same input circuit (with the exception of the ‘phono’ input), so there is no reason why you should not connect a different device to any of the inputs. For example, if you had two DVD players and the AV input was not being used, then the second DVD player could be connected to the AV input.

When connecting a video source, its audio must be connected to the corresponding sockets. For example, if you a had a satellite decoder plugged into a SAT video input, the audio must be connected to the SAT audio inputs!

The hierarchy for video connections for best quality is as follows;

<HDMI

<Component/RGB

<S-Video

<Composite.

You should connect as many of these as possible. The unit will automatically select the best quality connection for the source available. For any video source to be available in Zone 2 you must have an S-Video or Composite connection between the unit and the source.

Making connections

<Wherever possible, connect both the analogue and digital outputs of digital sources. This enables use of a digital input for the main zone and the corresponding analogue input for recording onto an analogue tape deck, VCR or PVR, or for the Zone 2 or 3 output.

<Take care to place cables as far from any power supply cabling as is practicable, to reduce hum and other noise problems.

Product differences and options

Product operation is broadly similar for the AVR500, AVR600 and AV888, however, the AVR600 & AV888 have a greater variety of input connectors and a different rear panel layout. For this reason, two sections of connection diagrams are presented. Please see Page 8 for the AVR600 & AV888. For the AVR500 please skip ahead to Page 14.

English

E-7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents N d b o o k AVR surround amplifier / AV processor AVR500 / AVR600 / AV888Important safety instructions Safety GuidelinesSafety compliance Class II productClass II produit Instructions de sécurité importantesRespect des consignes de sécurité Page Professional Installation? ContentsDIY setup? WelcomeBefore you Begin… Standby power PowerPlacing the unit Interconnect cablesTrademark acknowledgements Making connections GeneralProduct differences and options Component/RGB Video CompositeAVR600 AV888 Zone 3 connectors Hdmi connectorsComponent/RGB video connectors Zone 2 connectorsDigital audio Phono Analogue audio ConnectorsTape inputs MCH inputInfra-red IR connectors Trigger connectorsSatellite receiver DVD playerCD player Use the Composite connection if HdmiConnecting an iPod using the Arcam rDock Component, S-Video and Composite connectors, see Video connectorsAVR500 Aerials, control and communicationAV, SAT, DVD For more information on connecting speakers, see Subwoofer outputsFront panel Phones socket Trigger connectors Preferred video hook-up, in order of preference is VCR, Camcorder, Games Console etcConnecting an iPod using the Arcam rDock Aerial connectors AVR500/AVR600 only Radio ConnectorsSirius DAB optionConnecting an aerial Data connectors Network connectors USB connector Other ConnectorsRS232 serial connector RLead/rDockConnecting subwoofers Connecting speakers AVR500 & AVR600Speakers Speaker cablesSubwoofer CentreFront left and right Surround left and rightOperation Switching onOperating your AVR500 /AVR600 / AV888 Selecting a sourceUsing Zone 2 Updating firmware using a PCExtended front panel menu Front panel Operation CR102 universal remote controller Inserting batteries into the remote controlUsing the remote control Useful information Device Mode / Source keysCode blink-back Controlling other devicesAMP AMP Device Mode IPod commandsOK selects/play the highlighted file DVD DVD Device Mode TUN TUN Device ModeNetwork commands Highlighted menu on the screenSAT SAT Device Mode AV AV Device ModeMenus VCR VCR Device Mode PVR PVR Device ModeStarts Program mode CD CD Device ModeShift + rcycles through the repeat Options track, disc, etcSpeaker types Essential SetupSpeaker Distances Speaker LevelsAuto speaker setup Auto speaker SetupProblems Using a subwooferNavigating the setup menu Setup menusVideo Selecting the video sourceSelecting the audio source Treble Bass Input ConfigPlii Dimension Plii Centre Width Plii Panorama General SetupGeneral information and system controls Is usedSpkr Types Auto SetupSpkr Distance Spkr LevelsVideo Outputs Video InputsProgressive scan playback Important points to rememberMode Zone SettingsNetwork For Stereo sourcesEnglish Decoding Modes IntroductionTwo-channel source modes Decoding modes Multichannel source modesVolume Leveller SettingsDolby Volume is a sophisticated new Calibration OffsetEnglish Saving and selecting Presets Tuning/Channel SelectionDeleting Presets Tuner OperationDefault unlock code is Sirius errorsAdd to your subscription OperationSelecting the playback source Network/usb OperationUSB playback Internet radio stationsAnalogue pre-amplifier outputs AVR600/AV888 only External AmplifiersEnglish XLR balanced line outputs AV888 only SW2, SW3Zone Multi-room Set upZone 3 AVR600/AV888 only Zone 2 and 3 control outputsZone English Multi-room connection guideCode Learning Customising CR102Volume punch-through Creating MacrosKey Mover Locking/Unlocking a specific Device Mode Mode MoverTo restore a moved Device Mode key to its original state Copy a key between Device ModesResetting the CR102 Mode key IR punch-throughProblem Check that When I turn on Volume is always too loudSwitched off Wired networkContinual improvement policy SpecificationsWorldwide Guarantee Product GuaranteeClaims under guarantee Problems?Device code Tables GEC GBCHCM HYDOKI NU-TECRBM RCAYU-MA-TU AVPGPX ADB STSNTL UPCAKI 3D LABAMW AtacomTVE TSMXMS AsciIdte HNEKPN SATSH222E Issue

AVR500 / AVR600 / AV888 specifications

The Arcam AVR500, AVR600, and AV888 are high-performance audio-video receivers that exemplify Arcam's commitment to delivering exceptional sound quality and versatility in home theater systems. Each model boasts a combination of advanced technologies, robust build quality, and a user-friendly interface, making them popular choices among audiophiles and home cinema enthusiasts.

The Arcam AVR500 is designed for those who appreciate high fidelity sound. It features a 7.1 channel amplifier delivering 100 watts per channel, allowing for immersive audio experiences. The AVR500 supports various audio formats, including Dolby TrueHD and DTS-HD Master Audio, ensuring that users can enjoy their favorite movies and music with rich, dynamic sound. The unit is equipped with extensive connectivity options, including multiple HDMI inputs and outputs, enabling seamless integration with other devices.

Moving up the line, the AVR600 enhances the AVR500's capabilities with additional power and features. It features a more powerful 120 watts per channel amplification and includes advanced room calibration technology known as Arc. This innovative feature optimizes audio playback by analyzing the room’s acoustics and adjusting the sound accordingly, helping to create a more immersive home theater experience. The AVR600 also supports 3D video pass-through and features HDMI 1.4 compatibility, making it future-proof for new video technologies.

At the pinnacle of this lineup, the Arcam AV888 takes a slightly different approach, focusing on becoming a premier preamp/processor that connects to external amplification. The AV888's superior processing ensures audiophiles experience the highest quality sound possible. With support for multi-channel PCM audio and a range of processing formats, users can experience the latest high-definition audio technologies. The unit houses advanced digital-to-analog converters for enhanced sound clarity and supports 4K video upscaling, making it an excellent choice for those invested in the latest visual standards.

All three models share a commitment to high-quality construction, ensuring durability and longevity. The user interface is intuitive, making navigation between functions seamless. This trio of receivers is compatible with various streaming services, allowing music to be enjoyed effortlessly from multiple sources.

In summary, the Arcam AVR500, AVR600, and AV888 provide exceptional sound quality, advanced features, and robust build quality, catering to an array of home entertainment needs. Whether for music or movies, these receivers promise rewarding and captivating listening experiences.
Top Page Image Contents