Overview
Ê
ÊMain Control Panel. In the main control panel, there is button for muting the sound. There is also a button for bypassing overall processing, allowing you to hear the unaffected sound. There is also a Processor Select virtual signal path which allows access to the control panels for the separate processes. There is also a Dynamic Gain meter corresponding to the LEDs on the front panel of the DP11EQ. The Connect button accesses any units connected to a computer.
Dynamics Processor Panel. In the Dynamics Processor Panel, there is a Dynamics Select virtual signal path to select the desired dynamics process. The dynamics graph allows you to view changes to the signal dynamics while you make adjustments. To the right, there are several fields which allow you to adjust parameters. Near the top, there is a Dynamic Gain meter corresponding to the one on the front panel of the DP11EQ. There are also Snapshot buttons for storing and viewing an original response curve while making adjustments, a Clear button, a Threshold Offset slider and an Output gain slider.
Parametric Equalizer Panels. There are two parametric equalizers in the unit. Each one has high- and low- frequency filters which can be set as shelf or cut, along with additional parametric filters. There is a response curve viewer, an Output gain slider, and IN/OUT meters. There are also Snapshot buttons, a Clear button, and a New button for setting new parametric filters.
Delay Panel. The Delay Panel allows you to set the delay in milliseconds, meters, feet, or inches. You can also set the air temperature in Fahrenheit or Celsius to compensate for room temperature when setting delay by distance. The delay panel also includes a Clear button for removing any unwanted settings.
English ± 9