Shure DP11EQ manual Parametric Equalizer, Overview

Page 18

PARAMETRIC EQUALIZER

The DP11EQ also contains two parametric equalizers, with up to 11 parametric filters possible. These equalizers can be used for tuning out feedback or other anomalies in the frequency response of the acoustics of a room or sound system. There are high- and low-frequency rolloff/shelf filters, and parametric filters with adjustable frequency, gain, and width. Parametric filters are represented as dots, while the high- and low-frequency filters are represented as squares. When a filter is selected, the dot representing that filter changes color to indicate that it has been selected. Parametric filters can be edited using cut, copy, and paste.

Note on processing resources: The number of filters available is directly affected by the amount of dynamics processing. The AGC leveler takes the space of 7 parametric filters, while the no overshoot peak limiter takes the space of 2 parametric filters. So, if all dynamics processes are on except leveler and peak limiter, then 9 parametric filters are available. If the peak limiter is on with no leveler, there are 7 parametric filters available. If the leveler is on with no peak limiter, there are 4 parametric filters available. If both the leveler and peak limiter are on, there will be 2 parametric filters available. The number of filters also depends on whether or not both equalizers are used. For instance, 9 parametric filters are available if all dynamics processes are on except leveler and peak limiter, but using only one equalizer. If both equalizers are used in this situation, then there will be 7 parametric filters available between both equalizers.

Overview

Parametric Equalizer Graph. This graph displays squares and dots representing the parametric and high/low frequency filters. Using this graph, you can adjust all of the filters.

NEW Button. Click on this button to create new shelf/cut or parametric filters. A new parametric filter always appears at 1.0 kHz, 0dB, 2/3-octave in width. The number of remaining filters is displayed underneath the button.

FREQ. Box. This box displays the frequency center of the currently selected filter. Click on the arrow buttons or type in the field to edit the frequency.

SLOPE/WIDTH Box. This box displays the width of a selected parametric filter, or the slope of a selected shelf or cut filter.

GAIN Box. This box displays the boost or cut of the currently selected filter.

CLEAR Button. Click on this button to reset the currently selected parametric filter, all filters, or an entire equalizer.

OUTPUT Level Control. Drag this slider to adjust the overall gain of the equalizer section. This can be used in conjunction with the IN/OUT Level Meters.

Response Curve Graph. This graph displays the frequency response of the equalizer. See Response Curve Graph.

SNAPSHOT Buttons. See Snapshots.

IN and OUT Level Meters. See IN/OUT Meters and OUTPUT Control.

English ±17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DP11EQ Table of Contents Hardware Features Software FeaturesIntroduction Front Panel DP11EQ HardwareOverview BackDIP Switches Shure Link Device IDAudio Connections Main AmplifierSubgroup Insert Input Insert DP11EQ Software Connecting the DP11EQ to a Computer via the RS-232 COM PortSoftware Installation IntroductionConfiguring the Computer Serial Port Accessing the Connected DP11EQsShure Program Group Overview Main Controls Processor Select ButtonsDynamics Processor Dynamics Parameters Dynamics Processes GateExpander AGC Leveler Compressor LimiterSnapshots Editing Dynamics ProcessesParametric Equalizer Setting and Adjusting Parametric Filters Parametric Equalizer Edit Boxes and ControlsHigh- and Low-Frequency Shelf/Cut Filters Response Graph Cutting, Copying, and Pasting Parametric FiltersIN/OUT Meters and Output Control Meter CalibrationDelay Delay for Solving Remote Speaker AlignmentDelay for Solving Phase Cancellation Problems Reversing the Output Signal Polarity Setting Delay by TimeSetting Delay by Distance Shure Link Options Shure Link NetworksShure Link Connections Shure Link Device MenuMaintenance ScenesTo Recall Settings from Disk SettingsTo Save Settings to Disk Customizing Graph ColorsLocking Out the Front Panel Appendix A. SpecificationsPrinting DP11EQ Settings Exiting the DP11EQ ApplicationDelay Dual-Mounted Units Appendix B. Rack Mounting the DP11EQSingle Unit Mounting in an Equipment RackAppendix C. Connectors and Cables Audio ConnectorsAudio Cables In. Balanced to 1/4 -in. Unbalanced In. to 1/4 -in. BalancedIn. to 1/4 -in. Unbalanced XLR male to 1/4 -in. BalancedXLR female to 1/4 -in. Balanced XLR female to 1/4 -in. UnbalancedRCA to 1/4 -in. Unbalanced Computer Interface Ð 9-Pin to 25-Pin RS-232 Cable Digital Connectors and CablesComputer Interface Ð 9-Pin to 9-Pin RS-232 Cable Shure Link Cable Ð 5-Pin DIN Cable MIDI-compatible cableAppendix D. Keyboard Controls General ControlsIN/OUT Meters and Output Slider Controls Parametric Equalizer Controls
Top Page Image Contents