Shure DP11EQ manual DIP Switches, Shure Link Device ID

DIP Switches

The DIP switches located on the rear panel are used for adapting the unit to the sound system requirements. See the table below.

DIP	FUNCTION		POSITION
SWITCH
		UP		DOWN
1±4	Device ID	see below		see below
5±8	unused	Ð		Ð
9	Output Sensitivity	+4 dBu		±10 dBV
10	Input Sensitivity	+4 dBu		±10 dBV

Shure Link Device ID

When multiple DP11EQ s are linked, each one must be assigned a unique Device ID, 0 through

15.DIP switches 1 through 4 on the rear panel are used to set the Device ID. To change the Device ID, align the switches according to the illustrations below. The unit comes factory preset to Device ID

		DEVICE ID			0		DEVICE ID			1	DEVICE ID			2		DEVICE ID			3
SWITCH UP	1		2	3	4	1		2	3	4	1	2	3	4	1		2	3	4
		DEVICE ID			4		DEVICE ID			5	DEVICE ID			6		DEVICE ID			7
	1		2	3	4	1		2	3	4	1	2	3	4	1		2	3	4
SWITCH DOWN
		DEVICE ID			8		DEVICE ID			9	DEVICE ID			10		DEVICE ID			11
	1		2	3	4	1		2	3	4	1	2	3	4	1		2	3	4
		DEVICE ID			12		DEVICE ID			13	DEVICE ID			14		DEVICE ID			15
	1		2	3	4	1		2	3	4	1	2	3	4	1		2	3	4

English ± 4