Shure DP11EQ Customizing Graph Colors, To Save Settings to Disk, To Recall Settings from Disk

Page 26

Settings

Settings for individual panels can be stored separately, as well. Settings are saved on disk with extensions which indicate the settings type: .DYN indicates dynamics, .PEQ indicated parametric equalizer, and .DLY indicates delay.

To Save Settings to Disk

To save the setting from the dynamics, delay, or either equalizer panel:

1.Click on File in the menu bar of the current panel.

2.Select the Save Settings... option of the drop-down menu.

3.In the Description field, type a description of the settings.

4.In the File Name field, type the name of the settings.

5.Click on the OK button.

To Recall Settings from Disk

Once the settings have been saved, the Windows software can be used to reload those settings from disk and recall them to another DP11EQ . To recall settings:

1.Click on File in the menu bar of the current panel.

2.Select Recall Settings...

3.On the Settings window, select the desired settings name.

4.Click on the OK button.

Customizing Graph Colors

The graph colors on the DP11EQ software interface can be customized to fit individual tastes. This can help make the display more visible or aesthetically pleasing. To change the color of an item on the interface:

1.Click on Options in the main menu bar of the Main Control Panel.

2.Click on Colors...

3.In the Color Options window, select Dynamic Graph, Parametric Graph, or Response

Graph.

4.On the box just below the radio buttons, click on the button.

5.In the drop down menu, select the item you would like to assign a new color. The space below the field will display the selected item.

6.On the colored squares beside the display, select the desired color.

7.Click on the OK button.

English ±25

Image 26
Contents DP11EQ Table of Contents Introduction Hardware FeaturesSoftware Features Front Panel DP11EQ HardwareOverview BackDIP Switches Shure Link Device IDSubgroup Insert Audio ConnectionsMain Amplifier Input Insert DP11EQ Software Connecting the DP11EQ to a Computer via the RS-232 COM PortSoftware Installation IntroductionShure Program Group Configuring the Computer Serial PortAccessing the Connected DP11EQs Overview Main Controls Processor Select ButtonsDynamics Processor Dynamics Parameters Expander Dynamics ProcessesGate AGC Leveler Compressor LimiterSnapshots Editing Dynamics ProcessesParametric Equalizer High- and Low-Frequency Shelf/Cut Filters Setting and Adjusting Parametric FiltersParametric Equalizer Edit Boxes and Controls Response Graph Cutting, Copying, and Pasting Parametric FiltersIN/OUT Meters and Output Control Meter CalibrationDelay for Solving Phase Cancellation Problems DelayDelay for Solving Remote Speaker Alignment Setting Delay by Distance Reversing the Output Signal PolaritySetting Delay by Time Shure Link Options Shure Link NetworksShure Link Connections Shure Link Device MenuMaintenance ScenesTo Recall Settings from Disk SettingsTo Save Settings to Disk Customizing Graph ColorsLocking Out the Front Panel Appendix A. SpecificationsPrinting DP11EQ Settings Exiting the DP11EQ ApplicationDelay Dual-Mounted Units Appendix B. Rack Mounting the DP11EQSingle Unit Mounting in an Equipment RackAudio Cables Appendix C. Connectors and CablesAudio Connectors In. Balanced to 1/4 -in. Unbalanced In. to 1/4 -in. BalancedIn. to 1/4 -in. Unbalanced XLR male to 1/4 -in. BalancedRCA to 1/4 -in. Unbalanced XLR female to 1/4 -in. BalancedXLR female to 1/4 -in. Unbalanced Computer Interface Ð 9-Pin to 25-Pin RS-232 Cable Digital Connectors and CablesComputer Interface Ð 9-Pin to 9-Pin RS-232 Cable Shure Link Cable Ð 5-Pin DIN Cable MIDI-compatible cableAppendix D. Keyboard Controls General ControlsIN/OUT Meters and Output Slider Controls Parametric Equalizer Controls