EN 19
VIEWFINDER | VIEWFINDER |
T
W
WIDE MODE | O FF | |||
ZOOM |
| 2 0X | ||
D I S |
|
| OFF | |
GA I N | UP | AGC | ||
TO | FADER / W IPE | MENU | ||
TO | P . AE / EFFECT | MENU | ||
TO DAT E / TIME MENU | ||||
TO SYSTEM MENU |
| |||
END | I TEM ZOOM SW . | |||
SET | SET | BUTTON | ||
SCENE |
| 5S |
BEEP |
| ON |
W IND CUT | OFF | |
SOUND | MODE | 4 8kHz |
I D No . |
| 0 7 |
END | I TEM ZOOM SW . | |
SET | SET BUTTON | |
RECORDING MENU | SYSTEM MENU | |
MENU BUTTON | ZOOM LEVER |
|
| SET BUTTON |
|
|
| MANUAL |
| AUTO | |
|
| FOCUS |
|
| EXP. |
POWER DIAL | SET | WB |
| ||
|
| PRO |
| SELECT DIAL | |
System Menu
The System Menu allows you to set the following functions: Scene, Beep, Wind Cut, Sound Mode and ID numbers.
1 SELECT OPERATION MODE
Set the Power Dial to “REC” and set the Select Dial to “MANUAL”.
2 ACCESS RECORDING MENU
Press MENU. The Recording Menu appears in the viewfinder.
3 ACCESS SYSTEM MENU
Place the pointer next to “TO SYSTEM MENU” by sliding the Zoom Lever, then press SET. The System Menu appears in the viewfinder.
4 SELECT FUNCTION
Place the pointer next to the desired function by sliding the Zoom Lever, then press SET. The pointer stops blinking, indicating that the function has been selected.
5 SET FUNCTION PARAMETERS Slide the Zoom Lever in either direction to cycle through the available settings for the selected function, and stop when the desired setting appears. Then press SET, and the pointer automatically moves to “END”.
•To set the parameters for a different function, repeat steps 4 and 5.
6 CLOSE SYSTEM MENU
Press SET twice. Setting is complete and the System Menu disappears.