JVC GR-DVJ70 Charging The Battery, Attach, Confirm Status, Detach BATTERY/BATTERIES

8EN

Charging The Battery

GETTINGSTARTED

You can charge one battery pack at a time, or two consecutively.

ATTACH

CHARGE INDICATOR 1

CHARGE INDICATOR 2 BATTERY PACK BN-V714U

DETACH

To AC outlet

POWER CORD

DC JACK

RED BLACK

POWER LAMP

CHARGE MARKER

•The charge marker does not move by itself. After charging or removing a discharged battery, be sure to set the marker to the predetermined position.

1 SUPPLY POWER TO CHARGER Connect the power cord between the AC Power Adapter/Charger and an AC outlet. The power indicator comes on.

2 ATTACH BATTERY/BATTERIES Remove the battery pack’s protective cap and make sure the + – marks are facing down and aligned with the corresponding marks on the AC Power Adapter/Charger.

•The Charge Indicator begins blinking to indicate charging has started.

•To charge two batteries consecutively, attach one right after the other. If you attach a second battery while the first one is being charged, the time required for charging will increase.

Charge Marker

3	CONFIRM STATUS
	When the charge indicator stops blinking but stays
	on, charging is finished. (If two batteries are attached,
	this means that they’ve both been charged.)
CHARGING TIME
BATT. PACK		ONE	TWO
BN-V712U		approx. 140 min.	approx. 210 min.
BN-V714U		approx. 170 min.	approx. 240 min.

4 DETACH BATTERY/BATTERIES

Slide the battery or batteries in the direction of the arrow and lift off.

•Remember to unplug the power cord from the AC Power Adapter/Charger.

The charge marker makes it easy for you to differentiate between charged and discharged batteries. Choose RED or BLACK to mean charged or discharged, and you'll always know the status of your batteries.