JVC GR-DVJ70 specifications Insert Editing, Find Edit in Point, Pause During Editing

58EN EDITING (Cont.)

Insert Editing

You can insert snapshots and other scenes in previously recorded footage.

6w

T W

POWER DIAL

REMOTE SENSOR

RECORDING START/STOP

BUTTON

DISPLAY BUTTON

12:34 INSERT BUTTON

PLAY BUTTON

PAUSE BUTTON

REW(IND) BUTTON

RM-V708U or RM-V710U (optional: CU-V70KIT E)

1 FIND EDIT OUT POINT Confirm the time code at this point. (☞ pg. 47)

2 FIND EDIT IN POINT

Press REW until the point is located, then press

PAUSE.

3 PREPARE FOR INSERT EDITING Press and hold INSERT on the remote control, then press PAUSE. “6w” and the Time Code (min.:sec.) appear in the viewfinder.

NOTE:

To see the on-screen characters on a connected TV, press DISPLAY on the remote control.

(☞ pg. 50)

4 START RECORDING

Press RECORDING START/STOP to begin editing.

•Confirm the insert at the time code you checked in step 1.

5 PAUSE DURING EDITING

Press RECORDING START/STOP. Press again to resume editing.

6 STOP EDITING

Press RECORDING START/STOP, then press STOP.

NOTES:

●When performing Insert Editing, the tape’s Video Area and Sub-Code Area (☞ pg. 5) are rewritten, so the date and time information changes.

●If you perform Insert Editing onto a blank space on the tape, the audio and video may be disrupted. Make sure you only edit recorded areas.