JVC GR-DVJ70 VCR/TV Connection, Connectvcr Camcorder to TV or, Attach CAM Stand to Camcorder

44EN PLAYBACK Basic Connections (Cont.)

VCR/TV Connection

B

C

CAM STAND

c

b

a

A

MIC

AV-OUT

DC-IN 6V

To AV OUT

AUDIO and VIDEO cable (ø3.5 DV TV or VCR)

VIDEO OUT select switch (Y/C or CVBS)

To AUDIO and

VIDEO IN connectors

Cable adapter (provided)

1 CONNECTVCR CAMCORDER TO TV OR

Connect as shown in the illustration. If your TV/VCR has the SCART connector, use the provided cable adapter.

2 ATTACH CAM STAND TO CAMCORDER

Line up A with a , B with b and C with c . The CAM Stand has two sides. One side is used to hold the camcorder upright and the other side is used to hold the camcorder flat.

3 TURN ON POWER

Turn on the power to the camcorder and the TV/VCR.

4 SELECT TV’S VIDEO MODE

Set the TV to the channel or mode appropriate for video playback.

If Using A VCR . . . go to step 5.

If not . . . go to step 6.

5 CONNECTINPUT VCR OUTPUT TO TV

Refer to your VCR’s instruction manual.

6 START PLAYBACK

Slide the cover (☞ pg. 45) and press PLAY. You can watch the scenes you recorded on the TV.

7 END PLAYBACK

Press STOP and, if you’re not going to continue using the camcorder, set the Power pDial to “OFF”.

NOTES:

To choose whether or not the following displays appear on the connected TV . . .

●Date/Time, Time Code

..... set to “ON” or “OFF” in the Playback Menu

(☞ pg. 49).

●Playback Sound Mode Display

..... set the Power Dial to “REC”, and set “ON

SCREEN” in the Date/Time Menu (☞ pg. 12) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.

●Set the VIDEO OUT select switch of connector as required: either to “CVBS” (with the direct VCR connection) or to “YC” (with the RGB converter connection).