JVC GR-DVJ70 Random Assemble Editing, Start Source Playback, Execute FADE/WIPE, Press FADE/WIPE

52EN

EDITING (Cont.)

Random Assemble Editing

Using the RM-V708U or RM-V710U remote control, you can use P.AE/Effects and make an original edited tape.

SOURCE TAPE (Camcorder)

NEW TAPE (VCR)

	TO REMOTE PAUSE
TO EDITING JACK	JACK
EDITING CABLE
TO S-VIDEO	TO S-VIDEO
OUTPUT JACK	INPUT JACK

S-VIDEO CABLE

	TO AUDIO
TO AUDIO OUTPUT JACKS (L/R)	INPUT JACKS (L/R)

T W

RM-V708U or RM-V710U

VIDEO OUT select switch (Y/C or CVBS)

AUDIO and VIDEO cable

TO VIDEO OUTPUT JACK TO VIDEO INPUT JACK

Cable adapter (provided)

If your VCR has the 21-pin AV VCR (Recording deck) input connector (SCART), use

the provided cable adapter.

1 MAKE CONNECTIONS

Connect the Docking Station to your VCR and make sure that the playback picture and sound are available on the connected TV (☞ pg. 43).

NOTES:

●When using a JVC VCR with a remote pause terminal, connect the editing jack on the Docking Station to the VCR’s remote pause terminal using an editing cable.

●If the VCR has an S-Video input terminal, connect it using an S-Video cable.

●If the VCR has only one audio input terminal, connect it using a conversion plug.

●Set the VIDEO OUT select switch of connector as required: either to “CVBS” (with the direct VCR connection) or to “YC” (with the RGB converter connection).

To Operate The VCR With The Remote Control . . .

..... press and hold SHIFT, then press the

appropriate control button.

2 START SOURCE PLAYBACK

Press PLAY and then press R.A. EDIT ON/OFF on the remote control. Make sure to point the remote control at the Docking Station's sensor.

•The Random Assemble Editing Menu appears on the TV screen.

•If you're not using a Fade/Wipe at the PROGRAMME 1 Edit-In point, go to step 4.

3 EXECUTE FADE/WIPE IN

Press FADE/WIPE.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You can’t use a Picture Wipe/Dissolve at the beginning of Programme 1, or at the end of the last scene.