EN 33
T
W
WIDE MODE | O FF |
| FADER / W IPE CUSTOM I ZE | ||||||
ZOOM |
| 2 0X |
|
|
|
|
| ||
D I S |
|
| OFF |
| 1 |
|
|
| |
GA I N | UP | AGC |
| WH | WH I TE | FADER | |||
TO | FADER / W IPE | MENU |
| 2 | BK | BLACK | FADER | ||
TO | P . AE / EFFECT | MENU |
| 3 |
| P D I SSOLVE | |||
TO DAT E / TIME MENU |
| 4 |
| CORNER W I PE | |||||
TO SYSTEM MENU |
|
| 5 |
| W INDOW W I PE | ||||
END | I TEM ZOOM SW . |
|
|
| I TEM ZOOM SW . | ||||
SET | SET | BUTTON |
| END | SET SET BUTTON | ||||
RECORDING MENU | FADER/WIPE CUSTOMIZE |
|
MENU BUTTON
ZOOM LEVER
SET BUTTON
POWER DIAL
AUTO
FOCUS
EXP.
SET 
WB
PRO
Exchanging FADE/WIPE Effects
You can replace the 5 effects currently appearing in the menu with 5 others. After exchanging, the new effects appear in the Fader/Wipe Menu.
1 SELECT OPERATION MODE Set the Select Dial to “PRO”.
2 ACCESS RECORDING MENU
Press MENU. The Recording Menu appears in the viewfinder.
3 ACCESSMENU FADER/WIPE CUSTOMIZE
Place the pointer next to “TO FADER/WIPE MENU” by sliding the Zoom Lever, then press SET. The Fader/Wipe Customize Menu appears.
4 SELECT EFFECT TO BE REPLACED Place the pointer next to the number of the effect you want to replace by sliding the Zoom Lever, then press SET. The cursor stops blinking.
5 SELECT NEW EFFECT
Cycle through the remaining effects by sliding the Zoom Lever in either direction, and stop when the one you want is displayed. Press SET.
•The pointer automatically moves to “END”. •To replace other effects, repeat steps 4 and 5.
6 CLOSE MENU
Press SET twice. Selection is complete, and you can use the new effects during recording (☞ pg. 29).