JVC VN-C625 manual
Other Triggers, List, Preset Position, Motion Detection, Position Return Mode

Settings (Step 2 Network Settings)

2-4 Other Settings Using the "VN-C625U Setup Tool" (3. Alarm Setting) (Continued)

Alarm Input (Continued)

Item	Function/Set Value	Initial Value
4 List	Press here to display the IP address of the PCs to which an	—
	alarm notification is sent. ("Distribution Address List" Screen)
	To delete a distribution address, select the IP address to de-
	lete, followed by pressing the Delete button.

Notes

•The list allows setting of up to 10 addresses.

•Message packets will not be sent out when there are 11 or more addresses.

Other Triggers

	Item	Function/Set Value	Initial Value
5 Preset Position		For performing the following operations by using movement to	—
		preset positions as triggers.
	• Mode	*Please refer to the [Alarm 1/2] item for details on the set val-	*Please
	• Alarm Output	ues.	refer to
	• Black & White		the [Alarm
	• Message Packet		1/2] item
			for the
			initial
			values.
6 Motion Detection		For setting alarm operations when motion is detected within	—
		the area specified in the motion detection settings.
	• Mode	*Please refer to the [Alarm 1/2] item for details on the set val-	*Please
	• Alarm Output	ues.	refer to
	• Message Packet		the [Alarm
	• Alarm FTP		1/2] item
			for the
			initial
			values.
7 Black & White		For performing the following operations by using switches	—
		between the Color and Black & White modes as triggers.
	• Mode	*Please refer to the [Alarm 1/2] item for details on the set val-	*Please
	• Alarm Output	ues.	refer to
	• Go to a preset		the [Alarm
	position	Note	1/2] item
	• Return Mode	• The Black & White alarm may be activated upon	for the
	• Interval		initial
		restarting VN-C625.
	• Message Packet		values.

40